- BNC-all - ecn.purdue.edu

Prof. Busnaina Seminar Today at 11:00am in BRK 1001
by Turner, Jaime J 23 Jan '14

23 Jan '14

[cid:image001.png@01CF1823.BBB05050] Jaime Turner Birck Nanotechnology Center Purdue University 1205 West State STreet West Lafayette, IN 47907-2057 (765) 494-3509 jjturner(a)purdue.edu

1 0

Rescheduled dates and locations for the All User Meetings
by Jurss, Stephen E 23 Jan '14

23 Jan '14

Users, The all User Meeting is scheduled for the dates below: Tuesday, January 28, 2014 7:00 PM-8:00 PM Smith Hall 108 Wednesday, January 29, 2014 7:00 PM-8:00 PM Smith Hall 108 Please attend either of the sessions. Failure to do so will result in suspension from the labs and cleanroom. Note: Classroom seating is limited so a first come/ first serve basis will be used until the room is full. Stephen Stephen E. Jurss CIH, CSP Safety Manager Birck Nanotechnology Center 1205 W. State Street West Lafayette, IN 47907 Tx: 765-496-8337 E-mail: sejurss(a)purdue.edu<mailto:sejurss@purdue.edu>

1 0

Facility back in normal operation
by Jurss, Stephen E 21 Jan '14

21 Jan '14

Users, Birck is resuming normal operation. Stephen Stephen E. Jurss CIH, CSP Safety Manager Birck Nanotechnology Center 1205 W. State Street West Lafayette, IN 47907 Tx: 765-496-8337 E-mail: sejurss(a)purdue.edu

1 0

Facility on Lockdown
by Jurss, Stephen E 21 Jan '14

21 Jan '14

We have had a shooting on campus. We are on building lockdown until further notice. Stephen Stephen E. Jurss CIH, CSP Safety Manager Birck Nanotechnology Center 1205 W. State Street West Lafayette, IN 47907 Tx: 765-496-8337 E-mail: sejurss(a)purdue.edu

1 0

Final Notice - All User Meeting
by Jurss, Stephen E 21 Jan '14

21 Jan '14

Users, The all User Meeting is scheduled for the dates below: Tuesday, January 21, 2014 7:00 PM-8:00 PM Lilly Hall 1-105 Wednesday, January 22, 2014 7:00 PM-8:00 PM Lilly Hall 1-105 Please attend either of the sessions. Failure to do so will result in suspension from the labs and cleanroom. Stephen Stephen E. Jurss CIH, CSP Safety Manager Birck Nanotechnology Center 1205 W. State Street West Lafayette, IN 47907 Tx: 765-496-8337 E-mail: sejurss(a)purdue.edu<mailto:sejurss@purdue.edu>

1 0

BNC E-news for the week of January 20th
by Anthrop, Heather L 17 Jan '14

17 Jan '14

All Users Meeting Cleaning Holiday Seminars Workshops All Users Meeting The all User Meeting is scheduled for the dates below: Tuesday, January 21, 2014 7:00 PM-8:00 PM Lily Hall 1-105 Wednesday, January 22, 2014 7:00 PM-8:00 PM Lily Hall 1-105 Please attend either of the sessions. Failure to do so will result in suspension from the labs and cleanroom. Stephen E. Jurss CIH, CSP Safety Manager Cleaning Friday, January 24th at 2:00 pm the refrigerator in the kitchen will be cleaned out. ALL items left in there at that time will be thrown out. The refrigerator is to be used for daily use not the long term use. Holiday Purdue University will be closed Monday, January 20th in observance of Martin Luther King Jr. day. Seminars Dr. Cody Schlenker University of Washington Can Chemists Control Charge Dynamics in Organic Electronics? Tuesday, January 21st at 9:30 am WTHR (Wetherill) 201 Ahmed Busnaina Advanced Nanomaterials-based Manufacturing Platform for Printed Sensors, Electronics, Energy and Material Applications Thursday, January 23rd at 11:00 am Birck 1001 For more information please visit: http://www.purdue.edu/discoverypark/nanotechnology/events/view.php?id=1476 Narayan Ramesh Physics Failure based Reliability Estimation in Photovoltaic Systems Thursday, January 23rd at 9:30 am MRGN 121 For more information please visit: http://www.purdue.edu/discoverypark/nanotechnology/events/view.php?id=1480 Igor Melnikov Aluminum Oxide as Self-Organizing Template for Heterogeneous Photonic Crystals Friday, January 31st at 12:00 pm (noon) Birck 2001 For more information please visit: http://www.purdue.edu/discoverypark/nanotechnology/events/view.php?id=1484 Workshops BNC Tissue Culture Workshop - Hosted by Lisa Reece Biosafety Research Engineer Lab Director of BNC Bionanotech. Core Facilities Classes will be held every Monday, Wednesday, and Friday, 2-3 PM Start Date: Monday, Feb. 10, 2014 End Date: Wednesday, Feb. 26, 2014 At the Birck Nanotechnology Center Please contact either Lisa Reece at lreece(a)purdue.edu<mailto:lreece@purdue.edu> or Nancy Black at blackn(a)purdue.edu<mailto:blackn@purdue.edu> for more information! Deadline to register will be February 5, 2014. THIS WORKSHOP IS FOR ENGINEERS AND OTHERS WHO WANT TO LEARN BASIC TISSUE CULTURE TECHNIQUES. GREAT SKILL/TECHNIQUE TO HAVE ON YOUR CV FOR BIONANO AND BIOENGINEERING FIELDS! COMSOL Multiphysics 4.4 & Electromagnetics/Wave Optics Workshops at Purdue On January 24th, COMSOL will give a free multiphysics modeling workshop at Purdue University. The motto of this workshop is "learn-by-doing". The goal is to teach you the skills needed to model problems in COMSOL Multiphysics. Who should attend? Anyone interested in simulating and optimizing engineering phenomena based on PDEs, such as structural mechanics, heat transfer, electromagnetics, fluid flows, etc. Applications of the software are found in virtually every area of science and engineering. Friday, January 24th MRGN 121 AM Session 9:30am - 12:30pm An Overview of the Software Lunch 12:30pm - 1:30pm (provided by COMSOL) PM Session 1:30pm - 4:30pm Electromagnetics & Wave Optics Applications Registration: http://www.comsol.com/events/cm44ewow/28381 ------------------------ Seating is limited, so registration in advance is advised. If you have any questions do not hesitate to contact Gowtham Krishna by email at gowtham(a)comsol.com<mailto:gowtham@comsol.com> or phone at 781-273-3322.

1 0

Birck Lock-out procedures Public.docx
by Weaver, John R 17 Jan '14

17 Jan '14

If you are locked out of an office during non-business hours, please use the attached procedure. Thanks, John Weaver

1 0

Change of mail and package pick-up
by Totten, Mary J 15 Jan '14

15 Jan '14

Everyone, Starting next Tuesday January 21, 2014; Purdue mail services will be making only 1 mail and package pick-up a day. That means you must get packages and mail to us by 8:30AM every day if you want it to go out that day. Otherwise it will go out the next working day. This is a decision that was made by MMDC and we cannot make any changes to this schedule. I ask for your patience, and please try and plan ahead on any packages that need to go out. You can contact me for any questions. Thank you, Mary Jo Totten Birck Nanotechnology Center Discovery Park/Purdue University 1205 West State Street West Lafayette, IN 47907-2057 (765) 496-1173 "Strength does not come from physical capacity. It comes from an indomitable will." ― Mahatma Gandhi<http://www.goodreads.com/author/show/5810891.Mahatma_Gandhi>

1 0

BNC E-news for the week of January 13th
by Anthrop, Heather L 10 Jan '14

10 Jan '14

Final Exam Missing Equipment Seminar XPS Workshop Final Exam Mohammed Imrul Hossain Birck 1001 at 3:00 pm Monday, January 13th Intersubband Transitions in III-V Semiconductors for Novel Infrared Optoelectronic Devices Intersubband transitions (ISBTs) in the conduction band (CB) of semiconductor multiple quantum wells (QW) have led to devices, like quantum-well infrared photodetectors and quantum cascade lasers (QCL). Due to the complexities related to the valence band (VB), hole ISBTs have not been explored as intensively as their electronic counterparts. Absorption and photoluminescence due to ISBT in the VB have been reported for p-type Si-SiGe QWs but this material system suffers from significant challenges associated with the built-in strain of these lattice mismatched materials. The GaAs/AlGaAs material system is virtually strain-free and quite mature. We are investigating the properties of bound-to-bound inter-valence subband transitions in GaAs QWs with high Al composition barriers for mid-infrared emitters. Hole ISBTs are interesting because the polarization of the light emitted in heavy-to-light hole transitions is not restricted to the perpendicular of the quantum wells (unlike electron ISBTs in the CB due to selection rules), therefore surface emitting QCLs and ultimately vertical-cavity surface emitting devices are possible using these transitions. Moreover the valenceband offset for pure GaAs and AlAs is comparable with the conduction-band offset in the traditional InGaAs/InAlAs lattice matched to InP system. Very recently we have observed strong heavy to light hole absorption and heavy to heavy hole electroluminescence from ridge waveguide structures in the mid infra-red range. We are also working on dual wavelength mid infra-red QCLs in the InGaAs/InAlAs system lattice matched to InP. This may be useful in applications like differential absorption lidar where light has to be evaluated and compared at two different frequencies for environmental sensing application. Most approaches to multi-wavelength QCL operation involve the use of heterogeneous cascades. Our design involves a single type of active region to emit at two widely different wavelengths in the mid-infrared range. These results provide insights in the detail charge transport and optical properties of this design concept. We are currently investigating the possibility of this type of dual wavelength laser for inversionless lasing. Missing Equipment Please return the lab cart (similar to that pictured) to the second floor east wing. If you are using the cart and will need it longer please speak with Lisa Reece as soon as possible. [cid:image001.jpg@01CF0D17.81E59770] Seminar Ahmed Busnaina Thursday, January 23rd at 11:00 am Birck 1001 Advanced Nanomaterials-based Manufacturing Platform for Printed Sensors, Electronics, Energy and Material Applications Ahmed A. Busnaina, Ph.D. is the William Lincoln Smith Chair Professor and Director of National Science Foundation's Nanoscale Science and Engineering Center (NSEC) for High-rate Nanomanufacturing (CHN) at Northeastern University, Boston, MA. He is internationally recognized for his work on nano and micro scale defect (particulate and chemical) mitigation and removal in semiconductor fabrication. He also involved in the fabrication of nanoscale wires, structures and interconnects. He specializes in directed assembly of nanoelements and in the fabrication of micro and nanoscale structures. He served as a consultant on micro contamination and particle adhesion issues to the semiconductor industry. He has authored more than 470 papers in journals, proceedings and conferences. His research support exceeds 47 million dollars. He is on the editorial advisory board of Semiconductor International, the Journal of Particulate Science and Technology. He is a fellow of the American Society of Mechanical Engineers, and the Adhesion Society, a Fulbright Senior Scholar and listed in Who's Who in the World, in America, in science and engineering. He was awarded the 2006 Nanotech Briefs National Nano50 Award, Innovator category, the 2006 Outstanding Faculty Research Award, Northeastern University 2006, the 2005 Aspiration Award, Northeastern University. The NSF Center for High-rate Nanomanufacturing (CHN) has developed a novel reconfigurable manufacturing technology platform that operates at ambient temperature and pressure, is water-based, material-independent and low energy, and requires small capital investment. It has been used to make structures and devices across length scales. The center has developed templates with nanoscale features to assemble and print structures down to 20 nm in a short time and over a large area. Recently, a rapid and scalable manufacturing process for 3D nanoscale features was developed to fabricate interconnects and plasmonic devices using nanoparticles. Nonvolatile memory switches using CNTs or molecules assembled at wafer level is one application. Another application is a new biosensor chip (0.02 mm2) capable of simultaneously detecting multiple biomarkers. The biosensor can be in vitro or in vivo with a detection limit that is 200 times lower than current technology. The center also developed several CNT and MoS2 based electronic devices. The center develops the fundamental science and engineering necessary to manufacture a wide array of applications ranging from electronics, energy, sensors and materials to biotechnology. A directed assembly-based nanomanufacturing factory could be built for as low as $50 million, a fraction of today's cost, making nanotechnology accessible to millions of new innovators and entrepreneurs and unleashing a wave of creativity in the same way as the advent of the PC did for computing. XPS Workshop You are invited to join us at Birck Nanotechnology Center for some XPS Training. Sessions will be run by Dmitry Zemlyanov (dzemlian(a)purdue.edu<mailto:dzemlian@purdue.edu>), Surface Science Application Scientist Intro to XPS - January 16-17, 2014 Registration at: http://bit.ly/1eqIM8U The Intro to XPS flier at: https://dl.dropboxusercontent.com/u/12901964/XPS%20Workshop%20Flyer.pdf Intro to CasaXPS - January 20-21, 2014 Registration at: http://bit.ly/IYeOeu The Intro to CasaXPS flier at: https://dl.dropboxusercontent.com/u/12901964/CasaXPS%20Workshop%20flyer.pdf Do let me know if you have any questions (dzemlian(a)purdue.edu<mailto:dzemlian@purdue.edu>). Thanks, ***************************************** Dmitry Zemlyanov, PhD Surface Science Application Scientist Purdue University Birck Nanotechnology Center, 1205 West State Street, West Lafayette, IN 47907-2057 Tel.: +1 (765) 496-2457 (office - BRK 1274) +1 (765) 496-6217 (lab - BRK 1077) Cell: +1 (765) 427-3813 Fax: +1 (765) 496-8299 mailto:dzemlian@purdue.edu web: http://www.purdue.edu/dp/Nanotechnology/facilities/XPS.php Surface Science Facility Schedule: https://www.google.com/calendar/embed?src=bircksurfaceanalysis%40gmail.com&…

1 0

XPS workshops
by Turner, Jaime J 08 Jan '14

08 Jan '14

************************************* You are invited to join us at Birck Nanotechnology Center for some XPS Training. Sessions will be run by Dmitry Zemlyanov (dzemlian(a)purdue.edu<mailto:dzemlian@purdue.edu>), Surface Science Application Scientist Intro to XPS - January 16-17, 2014 Registration at: http://bit.ly/1eqIM8U The Intro to XPS flier at: https://dl.dropboxusercontent.com/u/12901964/XPS%20Workshop%20Flyer.pdf Intro to CasaXPS - January 20-21, 2014 Registration at: http://bit.ly/IYeOeu The Intro to CasaXPS flier at: https://dl.dropboxusercontent.com/u/12901964/CasaXPS%20Workshop%20flyer.pdf Do let me know if you have any questions (dzemlian(a)purdue.edu<mailto:dzemlian@purdue.edu>). Thanks, ***************************************** Dmitry Zemlyanov, PhD Surface Science Application Scientist Purdue University Birck Nanotechnology Center, 1205 West State Street, West Lafayette, IN 47907-2057 Tel.: +1 (765) 496-2457 (office - BRK 1274) +1 (765) 496-6217 (lab - BRK 1077) Cell: +1 (765) 427-3813 Fax: +1 (765) 496-8299 mailto:dzemlian@purdue.edu web: http://www.purdue.edu/dp/Nanotechnology/facilities/XPS.php Surface Science Facility Schedule: https://www.google.com/calendar/embed?src=bircksurfaceanalysis%40gmail.com&…

1 0