November 2021 - BNC-all - ecn.purdue.edu

Reminder: Winter Recess Announcement
by Reger, Ronald K 30 Nov '21

30 Nov '21

Sent on behalf of the Birck Leadership Team……. Dear Birck Research Community, The Purdue winter recess occurs December 23rd through January 2. The university is officially closed during this time and reopens on Monday January 3. As we have done in past years, the Birck Nanotechnology Center will remain available for research but will be unstaffed and hazardous gasses will be unavailable. As always if you plan to do any work over the recess please follow all applicable Protect Purdue protocols. Following is a description of the Birck center during this period of university closure: 1. All labs and cleanroom will be open. 2. All hazardous gases will be unavailable. 3. HF, BOE, and TMAH chemical processing will be allowed as long as a buddy is present. 4. Precursors for ALD systems will be available. 5. No shipping or receiving is being done at any building on campus. 6. The custodians will not be working so restrooms will not be maintained, and sanitation of touch surfaces will not be done. * We encourage users to keep the facility clean and be extra vigilant about the hygiene and COVID risks. 7. A few engineering and building staff may walk through occasionally for major issues but availability will be very limited and could be impacted due to COVID restrictions. * Faculty and senior researchers are encouraged to be more proactive (e.g. occasional walk throughs checking the labs where there is ongoing research). Email Birck management if you notice anything. Since there will be limited staff support during this winter recess the research groups are strongly encouraged to accomplish as much processing as possible before gases are turned off on Dec. 22. See the following for more detailed information (this will be up on the BNC Wiki): 2021-12-23 to 2022-01-03: Reduced Holiday Operations Due to Purdue’s Winter Recess hazardous gases will be unavailable from 3:30 PM Wednesday, December 22 until 8:00 AM on Monday, Jan 3rd. Lab work may otherwise proceed, though any fume hood work must be done with someone else present in the same laboratory or cleanroom bay (the “buddy” system). Please note the following changes to our normal operation: * ALD sources will remain available * Unavailable gases: * Ammonia (NH3) * Boron trichloride (BCl3) * Chlorine (Cl2) * Dichlorosilane (H2Cl2Si) * Hydrogen (H2) * Hydrogen Sulfide (H2S) * Krypton Fluoride (KrF) * Methane (CH4) * Nitric Oxide (NO) * Silane (SiH4) * Trichlorosilane (HCl3Si) * Tools affected: * Reduced capability: * PVD Nitride Sputtering System (NH3 unavailable) * Tube 1 Clean Ox (H2 unavailable, dry oxidation only) * Tube 4 Field OX (H2 unavailable, dry oxidation only) * Tube 7 General Oxidation (H2 unavailable, dry oxidation only) * Panasonic (Cl2 and BCl3 unavailable) * Plasma-Therm Apex SLR ICP RIE Etcher (H2, Cl2 and BCl3 unavailable) * Shutdown: * Axic PECVD (NH3 & SiH4 unavailable) * Easy Tube 3000 DVD (CH4 unavailable) * Epigress (SiH4 unavailable) * H2S CVD (H2S & H2 unavailable) * Nitric Oxide Anneal (NO unavailable) * Plasma-Therm Apex SLR HDPCVD (SiH4 unavailable) * Tube 2 Nitride (NH3 and HCl3Si unavailable) * Tube 3 LTO (SiH4 unavailable) * Tube 6 Polysilicon (SiH4 unavailable) * Work with highly dermally toxic materials (25% TMAH, BOE, HF) ABSOLUTELY requires a buddy within eyesight at all times. * Custodial staff will not be working. * There will be limited restocking of shared use supplies. * There will be limited availability of engineering staff to answer questions or repair down equipment. * On metallization tools sources will not be changed and depositions must be < 200 nm. Contact Steve Jurss (sejurss(a)purdue.edu<mailto:sejurss@purdue.edu>) with any questions.

1 0

BNC E-News : Week of November 29th, 2021
by Abrol, Sangeeta Saddul 29 Nov '21

29 Nov '21

[cid:image006.png@01D7401C.A3F567B0] Seminars /Workshops / Events 2021 Birck Nanotechnology Center Research Image Contest Sponsored by NSAC and Birck leadership - $600 in prize awards for student entries Please share your research images which showcase the beauty you've observed around you at Birck! All members of the Birck community - students, staff, and faculty - are welcome to submit their images that can include not only research images but also photos of life here at Birck. For research images, we ask that you also write a short paragraph explaining what we are looking at and why it is significant to you. We will assemble a panel of judges and announce awards at the BNC Holiday Party in December, and student entries are eligible to win: $300 for 1st place $200 for 2nd place $100 for 3rd place You can submit multiple images anytime by tomorrow and November 30, 2021 to a new MS Teams channel we have set up for the image contest, see link below: https://teams.microsoft.com/l/channel/19%3abf8be291dbb9468b831b6e0de523b930… If you have issues or questions, please email Neil Dilley at ndilley(a)purdue.edu<mailto:ndilley@purdue.edu> . Happy image hunting! [Text, logo, company name Description automatically generated] and the Birck Nanotechnology Center [A picture containing text, indoor, seat Description automatically generated][A picture containing background pattern Description automatically generated][A group of colorful feathers Description automatically generated with low confidence][A picture containing indoor, birthday, office, chocolate Description automatically generated][A picture containing tool Description automatically generated][cid:image015.png@01D7BEA6.8D0C2170][A close-up of a person's chest Description automatically generated with medium confidence] Practical Aspects of XPS: Dear Colleagues, I just would like to announce that a new XPS workshop "Practical aspects of XPS: from sample preparation to spectra interpretations" has been scheduled on December 7-9, 2021at 9 am - 1 pm. Every research group using or planning to use Surface Analysis characterization tools should have at least one trained student. Course Description: XPS is widely used to determine the chemical composition of a surface (element concentrations, chemical states, lateral and depth distributions, etc.). Nowadays XPS has become a standard technique for the characterization of solid surfaces. The course will teach how and what information can be provided by XPS. The quantification of the XPS data will be discussed in detail (thickness calculation, coverage, atomic percentage, etc.) Registration is at https://forms.gle/B7xjCHWADG9yVmTk6. Cost is $250. Please let me know if you have any questions. Thank you! Best regards, Dmitry Zemlyanov, PhD Senior Research Scientist - Surface Science Application Purdue University Birck Nanotechnology Center, 1205 West State Street, West Lafayette, IN 47907-2057 Tel.: +1 (765) 496-2457 (office - BRK 1274) +1 (765) 496-6217 (lab - BRK 1077) Cell: +1 (765) 427-3813 Fax: +1 (765) 496-8299 mailto:dzemlian@purdue.edu web: https://www.purdue.edu/discoverypark/birck/facilities/equipment/Characteriz… Birck Events<https://www.purdue.edu/discoverypark/birck/events/index.php> and Birck News<https://www.purdue.edu/discoverypark/birck/news/index.php> Mask Protocols in the Cleanroom We have observed various masking practices in the cleanroom recently so as a reminder for those using our Birck cleanroom, please continue to follow our COVID mask protocols. Masking requirements are either to use an M3 N95 mask by itself or use a standard mask under the cleanroom veil. If you have any questions please contact a staff member. Thanks, Ron Birck Engineering JOB POSTINGS: R&D Senior Design Engineer at Alpha & Omega Semiconductor Alpha & Omega Semiconductor is looking for a Senior Design Engineer who will work in a dynamic team environment at AOS headquarter located in Sunnyvale, CA. The main responsibility of this position is to work with marketing/process integration/product engineering group to develop silicon power device technology. Application link: Senior Design Engineer - Sunnyvale, CA - Alpha & Omega Semiconductor Jobs (applicantpro.com)<https://caosmd.applicantpro.com/jobs/2050960.html> R&D Senior Process Integration Engineer at Alpha & Omega Semiconductor Alpha & Omega Semiconductor is looking for a Senior Process Integration Engineer who will work in a dynamic team environment at AOS Semiconductor's leading technology fabrication facility (Jireh Semiconductor) located in Hillsboro, Oregon. The focus of this position is to work with device/process module/product engineering group to develop silicon power device process technology and improve existing technology yield. Primary responsibilities are to process flow implementation, electrical characterization (failure analysis), and wafer level testing yield monitoring. Application link: Entry Level MS or PHD Process Integration R&D Engineer - Hillsboro, OR - Jireh Semiconductor Jobs (applicantpro.com)<https://aosmd.applicantpro.com/jobs/1949301.html> Opening in OxideMEMS lab Sunil Bhave's OxideMEMS Lab <https://engineering.purdue.edu/oxidemems/publications.html> explores inter-domain coupling in Opto-mechanical, Spin-Acoustic and Atom-MEMS devices. PhD, Postdoctoral and Research Associate positions are available in these areas: · Superconducting qubit and cryo-CMOS circuits · Resonators and switches · MEMS-engine for LIDAR · Piezo-on-nitride transducers for atom-mechanics Expertise in many and most of Microfabrication, PiezoMEMS, Photonics, Quantum Mechanics, Microwave circuits, PCB design, ADS/HFSS, Comsol, Python and Labview is required. Please send CV to bhave(a)purdue.edu<mailto:bhave@purdue.edu> if you are interested.link<http://interested.link> Nanofabrication Engineer at Microsoft Microsoft Azure Quantum at Station Q Purdue seeks a nanofabrication engineer in the device fabrication group. You will join a multi-disciplinary team of theoretical and experimental physicists, materials scientists, and hardware and software engineers working at the forefront of quantum computing. You should have experience in device fabrication and characterization techniques. Our work at Station Q Purdue in West Lafayette, Indiana is part of global Microsoft Quantum research effort in topological quantum computing. Responsibilities: Responsibilities include develop, operate, and characterize semiconductor device fabrication processes in the Birck Nanotechnology Center cleanroom facilities located at Purdue University. Accurately documenting and effectively communicating all procedures and results to the larger research group is an essential aspect of the position. The candidate may also be required to assist in the maintenance of equipment. Qualifications: A successful candidate must have: * * Master's degree in Physics, Materials Science or Electrical Engineering. Other engineering disciplines will also be considered. * * Hands-on experience working with some or all of the following semiconductor process areas: lithography, thin film deposition and etch. * * Ability to follow protocols to operate sophisticated experimental equipment and to safely work with industrial solvents, acids, and bases in a cleanroom environment * * Excellent written and oral communication skills. * * Proficiency at accurately documenting processes and protocols. * * Strong attention to detail and good organizational skills. * * Strong desire to work in a collaborative international team. Preference may be given to candidates with the following additional qualifications: * * Industry experience in semiconductor device process integration. * * Expertise in thin film characterization, both structural and electrical. * * Familiarity with design and layout tools for chip scale devices. Please send your resume to flgriggi(a)microsoft.com<mailto:flgriggi@microsoft.com>, selected candidates will be contacted for interviews. NSAC Fab Forum There will be no NSAC Fab Forum this Tuesday NSAC Coffee Hour There will be no NSAC Coffee Hour this Friday Birck Nanotechnology Center Advanced Capabilities Omicron Surface Analysis Cluster (tool as named on the BNC Wiki) Plasma-Therm Apex HDPCVD SLR [cid:image014.jpg@01D7E538.C3C9F1C0] (High Density Plasma Chemical Vapor Deposition) Deposition Capabilities: Silicon Dioxide (170°C, SiH4/O2/Ar) Silicon Nitride (150°C, SiH4/N2/Ar) Amorphous Silicon (170°C, SiH4/Ar) Silicon Carbide (Future Capability) Features: Lower Temperatures (10-170°C) Ammonia-Free Nitride Fast! (100nm/min SiO2) Highly Automated (Load/Start/Unload) 600W Bias, 1000W ICP Power Supplies 4" Wafer Size Location: Cleanroom R Bay Contact: Rich Hosler (hosler0(a)purdue.edu)<mailto:hosler0@purdue.edu> Please visit the Birck Wiki to learn about the wide array of fabrication and characterization equipment at the facility<https://wiki.itap.purdue.edu/display/BNCWiki/> ***To post an announcement in the weekly BNC E-news please send to Sangeeta Abrol @ abrols(a)purdue.edu***<mailto:abrols@purdue.edu***> Follow us on Facebook and Twitter [Facebook icon]<https://www.facebook.com/nano.purdue.edu/> [Twitter icon] <https://twitter.com/BNCPurdue>

1 0

FW: Happy Thanksgiving, Announcement
by Black, Nancy Lee 24 Nov '21

24 Nov '21

Dear BNC Community, Many of us have worked directly or indirectly with Ali throughout his 10 years of directorship and witnessed how Birck becomes a wider multi-disciplinary community. His contributions are beyond words. We sincerely thank Ali for all that he has done for Birck and the broader community and wish him greater success in his next leadership role. We are planning a holiday celebration in December (announcement will be sent after the Thanksgiving holiday) and will have a dedicated session to celebrate Ali’s decade-long contribution to Birck. Please join us. Birck will be under an interim directorship for some time, which will be officially announced by the EVPRP office. Please let the Birck leadership team know if you have any questions or comments. Happy Thanksgiving and wish everyone enjoy a nice holiday break! Zhihong Zhihong Chen Professor of Electrical and Computer Engineering Birck Associate Director for Research Birck Nanotechnology Center Purdue University 1205 West State Street West Lafayette, IN 47907-2057 Tel: (765)494-0772<tel:%28765%29494-0772> Fax: (765)496-8299<tel:%28765%29496-8299> Email: zhchen(a)purdue.edu<mailto:zhchen@purdue.edu> From: BNC-all <bnc-all-bounces(a)ecn.purdue.edu<mailto:bnc-all-bounces@ecn.purdue.edu>> on behalf of "Shakouri, Ali" <shakouri(a)purdue.edu<mailto:shakouri@purdue.edu>> Date: Wednesday, November 24, 2021 at 1:52 PM To: "bnc-all(a)ecn.purdue.edu<mailto:bnc-all@ecn.purdue.edu>" <bnc-all(a)ecn.purdue.edu<mailto:bnc-all@ecn.purdue.edu>> Subject: [BNC-all] Happy Thanksgiving, Announcement Dear All, I wish you and your family a Happy Thanksgiving. We had our first in-person Birck staff event after COVID with the Thanksgiving lunch last week. I was delighted to thank our outstanding staff who work behind the scenes for the smooth operation of the center. Covid and major changes in society in the last two years make us think about many of our assumptions. However, one thing is certain. The value of the organization is in people and how a shared vision and a common goal of research excellence and societal impact can make a whole which is much larger than individual parts. I will be transitioning out of Birck leadership after ten years at the end of December. It has been a real privilege and honor to work with our outstanding students, staff and faculty. The vision and hard work of Jim Cooper, Dick Schwartz, Tim Sands, the founding faculty and dedicated staff have created a really unique interdisciplinary shared research environment that is rare in universities. Birck faculty have been able to increase the research funds from $15-20M/year a decade ago to more than $30M/year while we reduced our research overhead (subsidy) to operate the recharge centers from 45-50% (which was in par with top nano centers in US) to ~35% just before COVID. Last year has been difficult financially, but our faculty have brought record grants and the operation is ramping up steadily. Beyond supporting existing faculty, my major focus through cluster hires, preeminent teams and regular meetings with academic units has been the broadening of the Birck mission beyond nanoelectronics and quantum to ag, manufacturing, computer science/AI, biomedical/ vet med, pharmacy, physics, chemistry, and polytechnic. The SMART /WHIN projects have helped to align Birck’s mission to the mission of the original land-grant university by working closely with the community and elected officials in the ten surrounding counties. Purdue 2050, Conference of the Future, which was part of Purdue’s 150th anniversary events, helped us to connect to College of Liberal Arts, Honors College and Krannert. Some of this engagement is continuing through Neil Dilley’s great efforts in storytelling competition and new posters throughout the center. Birck strategic leadership team which included our managers (Zhihong Chen, Ron Reger, Mark Voorhis, Steve Jurss, Marcie Britton and Jaime Turner) as well as Neil, Tracy Hudson and Justin Wirth worked hard to streamline many of our operations and help improve the Birck culture. Outstanding initiatives by NSAC (e.g. during Covid-19 social distancing which was particularly hard for our students) are lessons that Birck’s main impact is our students and postdocs and we need to find ways to better engage them to shape our center. In the last ten years, we have housed 20 new faculty from 8 academic units from 5 colleges to setup part or all of their research operations at the Birck Center. This required renovating or re-assigning >13,000 sq. ft. of cleanroom and lab space. Since 2012, we have invested ~$18M in new shared tools. About 1/3 of this is from our recurring facility and equipment replacement budget and 2/3 was through competing in internal Purdue competition (Engineering Preeminent Teams, EVPRP Equipment grants), as well as startup package of faculty who believe in Birck's shared labs. Several faculty have also brought equipment through external grants (MRI and DURIP). During 2019-2020, we did a comprehensive planning for Birck 2.0 and the future needs for state-of-the-art nanofabrication and nanocharacterization at Purdue. The process was one-year long, engaged 35 faculty, 12 Department Heads, 5 Associate Deans for Research and 3 Deans. This resulted in a comprehensive 140-page report about facility needs and potential future centers of excellence. Some of this blueprint is the foundation of faculty initiatives in collaboration with PRF (Discovery Park District) that will hopefully leverage major federal funding through USICA (CHIPS and Endless Frontier Acts) and other sources. Moving forward, my recommendation is that Birck will be stronger when more faculty, students and staff engage and take ownership in our operation and future vision activities. This is critical for a vibrant center. I plan to focus on SMART industry consortium, AI in Community initiative as well as the commercialization of a new semiconductor characterization technology. We just received an NSF ERC Planning grant focused on AI in Manufacturing that will hopefully help us keep the momentum and create a new center of excellence. I would like to acknowledge the outstanding work of other previous and current Associate, Deputy and Scientific Directors: Zhihong Chen, Sunil Bhave, Yong Chen, Dana Weinstein, Dimitri Peroulis, Vlad Shalaev and Joerg Appenzeller as well as our Faculty Leadership Council (also including Rakesh Agrawal, Sasha Boltasseva, Miko Cakmak, Carol Handwerker, Mike Ladisch, Sophie Lelievre, Mark Lundstrom, Mike Manfra, Lisa Mauer, Jeff Rhoads, Haiyan Wang, and Alex Wei) who have played key roles to co-lead the center and help with several strategic initiatives. Thanks for everybody’s support over the years. It is an honor to be part of the Birck family. Best regards, Ali

1 0

Season's Greetings
by Shakouri, Ali 24 Nov '21

24 Nov '21

Dear All, As the year is coming to close, we reflect on unprecedented events that have impacted all of our lives. This is a difficult situation with self isolation and physical distancing, especially for many of our international students and researchers who are thousands of miles away from their families. There are some who have been personally impacted with the loss of family members and millions who are in economic hardship. During these difficult times, we appreciate unique gifts and contributions from each member of our community. We are fortunate to have dedicated students, staff and faculty who went out of their ways and regular responsibilities to help each other. We managed to keep Birck operational for critical research between April and June. Our dedicated staff and faculty developed standard operating procedures for all labs and cleanroom that are shared by more than 500 users across campus. Thanks to everybody who has been careful and extra vigilant, we had a smooth operation during the Fall semester. We would like to thank everybody's great contributions and hope you will have safe and healthy end of the year holidays and best wishes for the New Year 2021. Sincerely, Ali, Zhihong and Sunil [cid:image002.png@01D6D3A2.91AE72E0]

1 1

XPS workshop announcement
by Black, Nancy Lee 23 Nov '21

23 Nov '21

Dear Colleagues, I just would like to announce that a new XPS workshop "Practical aspects of XPS: from sample preparation to spectra interpretations" has been scheduled on December 7-9, 2021at 9 am - 1 pm. Every research group using or planning to use Surface Analysis characterization tools should have at least one trained student. Course Description: XPS is widely used to determine the chemical composition of a surface (element concentrations, chemical states, lateral and depth distributions, etc.). Nowadays XPS has become a standard technique for the characterization of solid surfaces. The course will teach how and what information can be provided by XPS. The quantification of the XPS data will be discussed in detail (thickness calculation, coverage, atomic percentage, etc.) Registration is at https://forms.gle/B7xjCHWADG9yVmTk6. Cost is $250. Please let me know if you have any questions. Thank you! Best regards, Dmitry ************************ ***************************************** Dmitry Zemlyanov, PhD Senior Research Scientist - Surface Science Application Purdue University Birck Nanotechnology Center, 1205 West State Street, West Lafayette, IN 47907-2057 Tel.: +1 (765) 496-2457 (office - BRK 1274) +1 (765) 496-6217 (lab - BRK 1077) Cell: +1 (765) 427-3813 Fax: +1 (765) 496-8299 mailto:dzemlian@purdue.edu web: https://www.purdue.edu/discoverypark/birck/facilities/equipment/Characteriz…

1 0

BNC E-News : Week of November 22nd, 2021
by Abrol, Sangeeta Saddul 22 Nov '21

22 Nov '21

Happy Thanksgiving to all! [cid:image006.png@01D7401C.A3F567B0] Seminars /Workshops / Events 2021 Birck Nanotechnology Center Research Image Contest Sponsored by NSAC and Birck leadership - $600 in prize awards for student entries Please share your research images which showcase the beauty you've observed around you at Birck! All members of the Birck community - students, staff, and faculty - are welcome to submit their images that can include not only research images but also photos of life here at Birck. For research images, we ask that you also write a short paragraph explaining what we are looking at and why it is significant to you. We will assemble a panel of judges and announce awards at the BNC Holiday Party in December, and student entries are eligible to win: $300 for 1st place $200 for 2nd place $100 for 3rd place You can submit multiple images anytime between now and November 30, 2021 to a new MS Teams channel we have set up for the image contest, see link below: https://teams.microsoft.com/l/channel/19%3abf8be291dbb9468b831b6e0de523b930… If you have issues or questions, please email Neil Dilley at ndilley(a)purdue.edu<mailto:ndilley@purdue.edu> . Happy image hunting! [Text, logo, company name Description automatically generated] and the Birck Nanotechnology Center [A picture containing text, indoor, seat Description automatically generated][A picture containing background pattern Description automatically generated][A group of colorful feathers Description automatically generated with low confidence][A picture containing indoor, birthday, office, chocolate Description automatically generated][A picture containing tool Description automatically generated][cid:image015.png@01D7BEA6.8D0C2170][A close-up of a person's chest Description automatically generated with medium confidence] Birck Events<https://www.purdue.edu/discoverypark/birck/events/index.php> and Birck News<https://www.purdue.edu/discoverypark/birck/news/index.php> NSAC volleyball team won the champion in the recent indoor volleyball intramural game organized by co rec. [Image.jpeg] JOB POSTINGS: R&D Senior Design Engineer at Alpha & Omega Semiconductor Alpha & Omega Semiconductor is looking for a Senior Design Engineer who will work in a dynamic team environment at AOS headquarter located in Sunnyvale, CA. The main responsibility of this position is to work with marketing/process integration/product engineering group to develop silicon power device technology. Application link: Senior Design Engineer - Sunnyvale, CA - Alpha & Omega Semiconductor Jobs (applicantpro.com)<https://caosmd.applicantpro.com/jobs/2050960.html> R&D Senior Process Integration Engineer at Alpha & Omega Semiconductor Alpha & Omega Semiconductor is looking for a Senior Process Integration Engineer who will work in a dynamic team environment at AOS Semiconductor's leading technology fabrication facility (Jireh Semiconductor) located in Hillsboro, Oregon. The focus of this position is to work with device/process module/product engineering group to develop silicon power device process technology and improve existing technology yield. Primary responsibilities are to process flow implementation, electrical characterization (failure analysis), and wafer level testing yield monitoring. Application link: Entry Level MS or PHD Process Integration R&D Engineer - Hillsboro, OR - Jireh Semiconductor Jobs (applicantpro.com)<https://aosmd.applicantpro.com/jobs/1949301.html> Opening in OxideMEMS lab Sunil Bhave's OxideMEMS Lab <https://engineering.purdue.edu/oxidemems/publications.html> explores inter-domain coupling in Opto-mechanical, Spin-Acoustic and Atom-MEMS devices. PhD, Postdoctoral and Research Associate positions are available in these areas: * Superconducting qubit and cryo-CMOS circuits * Resonators and switches * MEMS-engine for LIDAR * Piezo-on-nitride transducers for atom-mechanics Expertise in many and most of Microfabrication, PiezoMEMS, Photonics, Quantum Mechanics, Microwave circuits, PCB design, ADS/HFSS, Comsol, Python and Labview is required. Please send CV to bhave(a)purdue.edu<mailto:bhave@purdue.edu> if you are interested.link<http://interested.link> Nanofabrication Engineer at Microsoft Microsoft Azure Quantum at Station Q Purdue seeks a nanofabrication engineer in the device fabrication group. You will join a multi-disciplinary team of theoretical and experimental physicists, materials scientists, and hardware and software engineers working at the forefront of quantum computing. You should have experience in device fabrication and characterization techniques. Our work at Station Q Purdue in West Lafayette, Indiana is part of global Microsoft Quantum research effort in topological quantum computing. Responsibilities: Responsibilities include develop, operate, and characterize semiconductor device fabrication processes in the Birck Nanotechnology Center cleanroom facilities located at Purdue University. Accurately documenting and effectively communicating all procedures and results to the larger research group is an essential aspect of the position. The candidate may also be required to assist in the maintenance of equipment. Qualifications: A successful candidate must have: * * Master's degree in Physics, Materials Science or Electrical Engineering. Other engineering disciplines will also be considered. * * Hands-on experience working with some or all of the following semiconductor process areas: lithography, thin film deposition and etch. * * Ability to follow protocols to operate sophisticated experimental equipment and to safely work with industrial solvents, acids, and bases in a cleanroom environment * * Excellent written and oral communication skills. * * Proficiency at accurately documenting processes and protocols. * * Strong attention to detail and good organizational skills. * * Strong desire to work in a collaborative international team. Preference may be given to candidates with the following additional qualifications: * * Industry experience in semiconductor device process integration. * * Expertise in thin film characterization, both structural and electrical. * * Familiarity with design and layout tools for chip scale devices. Please send your resume to flgriggi(a)microsoft.com<mailto:flgriggi@microsoft.com>, selected candidates will be contacted for interviews. NSAC Fab Forum There will be no NSAC Fab Forum this Tuesday NSAC Coffee Hour There will be no NSAC Coffee Hour this Friday Birck Nanotechnology Center Advanced Capabilities Omicron Surface Analysis Cluster (tool as named on the BNC Wiki) [IMG_1022.JPG] Features: * Multi-tool instrument equipped with state-of-art UHV STM/AFM, X-ray photoelectron spectroscopy (XPS), high-resolution energy loss spectroscopy (HREELS) and low energy electron diffraction (LEED). * Ideal for Growth of 2D materials and ultra thin films under UHV: e-beam evaporator (2 sources evaporate simultaneously), several thermal evaporators (can be replaced; currently: Zn, Te, Bi, Se) and sputtering deposition source for high-melting temperature metals (can be replaced; currently: Ta). * Surface cleaning, functionalization and doping under UHV: atomic hydrogen source, argon sputtering, gas manifolds for UHV ALD, etc. * Full control on the surface chemical composition. * Deep characterization of the structural properties and electron states of a sample without exposure to air under UHV;. Contact: Dmitry Zemlyanov - dzemlian(a)purdue.edu<mailto:dzemlian@purdue.edu> (Staff in Charge), BRK 1077 ***To post an announcement in the weekly BNC E-news please send to Sangeeta Abrol @ abrols(a)purdue.edu***<mailto:abrols@purdue.edu***> Follow us on Facebook and Twitter [Facebook icon]<https://www.facebook.com/nano.purdue.edu/> [Twitter icon] <https://twitter.com/BNCPurdue>

1 0

Winter Recess Announcement
by Reger, Ronald K 19 Nov '21

19 Nov '21

Sent on behalf of the Birck Leadership Team……. Dear Birck Research Community, The Purdue winter recess occurs December 23rd through January 2. The university is officially closed during this time and reopens on Monday January 3. As we have done in past years, the Birck Nanotechnology Center will remain available for research but will be unstaffed and hazardous gasses will be unavailable. As always if you plan to do any work over the recess please follow all applicable Protect Purdue protocols. Following is a description of the Birck center during this period of university closure: 1. All labs and cleanroom will be open. 2. All hazardous gases will be unavailable. 3. HF, BOE, and TMAH chemical processing will be allowed as long as a buddy is present. 4. Precursors for ALD systems will be available. 5. No shipping or receiving is being done at any building on campus. 6. The custodians will not be working so restrooms will not be maintained, and sanitation of touch surfaces will not be done. * We encourage users to keep the facility clean and be extra vigilant about the hygiene and COVID risks. 7. A few engineering and building staff may walk through occasionally for major issues but availability will be very limited and could be impacted due to COVID restrictions. * Faculty and senior researchers are encouraged to be more proactive (e.g. occasional walk throughs checking the labs where there is ongoing research). Email Birck management if you notice anything. Since there will be limited staff support during this winter recess the research groups are strongly encouraged to accomplish as much processing as possible before gases are turned off on Dec. 22. See the following for more detailed information (this will be up on the BNC Wiki): 2021-12-23 to 2022-01-03: Reduced Holiday Operations Due to Purdue’s Winter Recess hazardous gases will be unavailable from 3:30 PM Wednesday, December 22 until 8:00 AM on Monday, Jan 3rd. Lab work may otherwise proceed, though any fume hood work must be done with someone else present in the same laboratory or cleanroom bay (the “buddy” system). Please note the following changes to our normal operation: * ALD sources will remain available * Unavailable gases: * Ammonia (NH3) * Boron trichloride (BCl3) * Chlorine (Cl2) * Dichlorosilane (H2Cl2Si) * Hydrogen (H2) * Hydrogen Sulfide (H2S) * Krypton Fluoride (KrF) * Methane (CH4) * Nitric Oxide (NO) * Silane (SiH4) * Trichlorosilane (HCl3Si) * Tools affected: * Reduced capability: * PVD Nitride Sputtering System (NH3 unavailable) * Tube 1 Clean Ox (H2 unavailable, dry oxidation only) * Tube 4 Field OX (H2 unavailable, dry oxidation only) * Tube 7 General Oxidation (H2 unavailable, dry oxidation only) * Panasonic (Cl2 and BCl3 unavailable) * Plasma-Therm Apex SLR ICP RIE Etcher (H2, Cl2 and BCl3 unavailable) * Shutdown: * Axic PECVD (NH3 & SiH4 unavailable) * Easy Tube 3000 DVD (CH4 unavailable) * Epigress (SiH4 unavailable) * H2S CVD (H2S & H2 unavailable) * Nitric Oxide Anneal (NO unavailable) * Plasma-Therm Apex SLR HDPCVD (SiH4 unavailable) * Tube 2 Nitride (NH3 and HCl3Si unavailable) * Tube 3 LTO (SiH4 unavailable) * Tube 6 Polysilicon (SiH4 unavailable) * Work with highly dermally toxic materials (25% TMAH, BOE, HF) ABSOLUTELY requires a buddy within eyesight at all times. * Custodial staff will not be working. * There will be limited restocking of shared use supplies. * There will be limited availability of engineering staff to answer questions or repair down equipment. * On metallization tools sources will not be changed and depositions must be < 200 nm. Contact Steve Jurss (sejurss(a)purdue.edu<mailto:sejurss@purdue.edu>) with any questions.

1 0

BNC E-news: Week of November 15th, 2021
by Abrol, Sangeeta Saddul 15 Nov '21

15 Nov '21

[cid:image006.png@01D7401C.A3F567B0] Seminars /Workshops / Events BNC Faculty Seminar Series Brett Savoie Charles Davidson Assistant Professor of Chemical Engineering (by courtesy) at Purdue University Thursday November 18th, 2021 12:00pm – 1:00pm, Zoom https://purdue-edu.zoom.us/j/98695180597 Topic : How Things Fall Apart: Learning from Degradation Chemistry Seminar for Neurotrauma and Diseases<https://vet.purdue.edu/cpr/Seminar%20for%20Neurotrauma.php> Sponsored by Plexon Neurotechnology Systems Wednesdays | 4-5pm | via Zoom NanoHub Workshop Announcement nanoHUB is excited to announce that a new workshop has been scheduled in the Fall 2021 session of our Hands-on Data Science and Machine Learning Training Series. Series information: Our series is aimed at active researchers and educators and designed to introduce practical skills with online, hands-on activities that participants will be able to incorporate in their own work. Hands-on activities will use nanoHUB cloud computing resources, negating the need to download or install any software. All that is required of the audience is an internet connection and an hour to spare for the demonstration. After the training sessions, you will be able to continue using nanoHUB for research or education. Recordings and associated materials from prior workshops can be found at the workshop webpage: https://nanohub.org/groups/ml/handsontraining<https://click.mail.nanohub.org/?qs=fa5d19fdba110be3328ac7c0e6aa1c23ed02fcba…> Register soon as seats are limited. Date/Time: Wednesday, November 17, 2021 / 1:00 PM – 2:00 PM EST Title: Integrating Machine Learning with a Genetic Algorithm for Materials Exploration Presenter: Joe D. Kern, Georgia Institute of Technology, Ramprasad Group Register for this workshop here<https://click.mail.nanohub.org/?qs=fa5d19fdba110be31df082c3e47a7f7022739f4c…> Abstract: The genetic algorithm is a computer algorithm inspired by nature: selecting parents of a generation via some fitness function, crossing-over the parent genes (reproduction), and randomly mutating the genes of the children. In this talk, we will explore how this algorithm can be used for materials discovery by: 1. Generating swift material property prediction using machine learning (ML) 2. Creating an algorithm to design new materials from combinations of prior ones 3. Integrating the ML property predictors with the design algorithm to discover new materials PolyGA, an implementation of the genetic algorithm for the polymer domain, will be used as the basis for this exploration. Bio: Joe D Kern is a Materials Science and Engineering graduate student at the Georgia Institute of Technology in the Ramprasad Group. Prior to graduate school, he dual majored in Materials Science and Computer Science at the University of Wisconsin – Madison and spent six years in the Minnesota National Guard as an Arabic Linguist. His research involves utilizing computational techniques, such as genetic algorithms and machine learning, to expedite materials discovery in the polymer chemical space. Regards, Alejandro Strachan Deputy Director, nanoHUB Arun Mannodi Kanakkithodi (he/him/his) Assistant Professor, School of Materials Engineering, Purdue University https://www.mannodigroup.com/ 2021 Birck Nanotechnology Center Research Image Contest Sponsored by NSAC and Birck leadership - $600 in prize awards for student entries Please share your research images which showcase the beauty you’ve observed around you at Birck! All members of the Birck community – students, staff, and faculty – are welcome to submit their images that can include not only research images but also photos of life here at Birck. For research images, we ask that you also write a short paragraph explaining what we are looking at and why it is significant to you. We will assemble a panel of judges and announce awards at the BNC Holiday Party in December, and student entries are eligible to win: $300 for 1st place $200 for 2nd place $100 for 3rd place You can submit multiple images anytime between now and November 30, 2021 to a new MS Teams channel we have set up for the image contest, see link below: https://teams.microsoft.com/l/channel/19%3abf8be291dbb9468b831b6e0de523b930… If you have issues or questions, please email Neil Dilley at ndilley(a)purdue.edu<mailto:ndilley@purdue.edu> . Happy image hunting! [Text, logo, company name Description automatically generated] and the Birck Nanotechnology Center [A picture containing text, indoor, seat Description automatically generated][A picture containing background pattern Description automatically generated][A group of colorful feathers Description automatically generated with low confidence][A picture containing indoor, birthday, office, chocolate Description automatically generated][A picture containing tool Description automatically generated][cid:image015.png@01D7BEA6.8D0C2170][A close-up of a person's chest Description automatically generated with medium confidence] Birck Events<https://www.purdue.edu/discoverypark/birck/events/index.php> and Birck News<https://www.purdue.edu/discoverypark/birck/news/index.php> Thanksgiving Luncheon (BNC Staff only) [cid:image013.jpg@01D7D7C9.B402CE00] JOB POSTINGS: R&D Senior Design Engineer at Alpha & Omega Semiconductor Alpha & Omega Semiconductor is looking for a Senior Design Engineer who will work in a dynamic team environment at AOS headquarter located in Sunnyvale, CA. The main responsibility of this position is to work with marketing/process integration/product engineering group to develop silicon power device technology. Application link: Senior Design Engineer - Sunnyvale, CA - Alpha & Omega Semiconductor Jobs (applicantpro.com)<https://caosmd.applicantpro.com/jobs/2050960.html> R&D Senior Process Integration Engineer at Alpha & Omega Semiconductor Alpha & Omega Semiconductor is looking for a Senior Process Integration Engineer who will work in a dynamic team environment at AOS Semiconductor's leading technology fabrication facility (Jireh Semiconductor) located in Hillsboro, Oregon. The focus of this position is to work with device/process module/product engineering group to develop silicon power device process technology and improve existing technology yield. Primary responsibilities are to process flow implementation, electrical characterization (failure analysis), and wafer level testing yield monitoring. Application link: Entry Level MS or PHD Process Integration R&D Engineer - Hillsboro, OR - Jireh Semiconductor Jobs (applicantpro.com)<https://aosmd.applicantpro.com/jobs/1949301.html> Opening in OxideMEMS lab Sunil Bhave’s OxideMEMS Lab <https://engineering.purdue.edu/oxidemems/publications.html> explores inter-domain coupling in Opto-mechanical, Spin-Acoustic and Atom-MEMS devices. PhD, Postdoctoral and Research Associate positions are available in these areas: · Superconducting qubit and cryo-CMOS circuits · Resonators and switches · MEMS-engine for LIDAR · Piezo-on-nitride transducers for atom-mechanics Expertise in many and most of Microfabrication, PiezoMEMS, Photonics, Quantum Mechanics, Microwave circuits, PCB design, ADS/HFSS, Comsol, Python and Labview is required. Please send CV to bhave(a)purdue.edu<mailto:bhave@purdue.edu> if you are interested.link<http://interested.link> [cid:image020.png@01D7BEAF.D3C3AE90] Postdoctoral Position – Nonlinear Nanophotonics – Deadline Nov.15, 2021 Fliers with more information posted on the bulletin boards. An electronics engineer position is available in the Smart Sensing and Electronics Systems Branch of NASA, located at the Glenn Research Center (GRC). The focus of the successful candidate will be on research, design, development, simulation and testing of sensing devices, transducers, components, and related circuitry for application to aerospace research and development endeavors. See https://www.usajobs.gov/GetJob/ViewDetails/615488500 for details. Contact Dallas Morisette morisett(a)purdue.edu<mailto:morisett@purdue.edu> for more detail Nanofabrication Engineer at Microsoft Microsoft Azure Quantum at Station Q Purdue seeks a nanofabrication engineer in the device fabrication group. You will join a multi-disciplinary team of theoretical and experimental physicists, materials scientists, and hardware and software engineers working at the forefront of quantum computing. You should have experience in device fabrication and characterization techniques. Our work at Station Q Purdue in West Lafayette, Indiana is part of global Microsoft Quantum research effort in topological quantum computing. Responsibilities: Responsibilities include develop, operate, and characterize semiconductor device fabrication processes in the Birck Nanotechnology Center cleanroom facilities located at Purdue University. Accurately documenting and effectively communicating all procedures and results to the larger research group is an essential aspect of the position. The candidate may also be required to assist in the maintenance of equipment. Qualifications: A successful candidate must have: • • Master’s degree in Physics, Materials Science or Electrical Engineering. Other engineering disciplines will also be considered. • • Hands-on experience working with some or all of the following semiconductor process areas: lithography, thin film deposition and etch. • • Ability to follow protocols to operate sophisticated experimental equipment and to safely work with industrial solvents, acids, and bases in a cleanroom environment • • Excellent written and oral communication skills. • • Proficiency at accurately documenting processes and protocols. • • Strong attention to detail and good organizational skills. • • Strong desire to work in a collaborative international team. Preference may be given to candidates with the following additional qualifications: • • Industry experience in semiconductor device process integration. • • Expertise in thin film characterization, both structural and electrical. • • Familiarity with design and layout tools for chip scale devices. Please send your resume to flgriggi(a)microsoft.com<mailto:flgriggi@microsoft.com>, selected candidates will be contacted for interviews. NSAC Fab Forum There will be no NSAC Fab Forum this Tuesday NSAC Coffee Hour There will be no NSAC Coffee Hour this Friday Birck Nanotechnology Center Advanced Capabilities Themis Z Aberration Corrected STEM/TEM [cid:image017.png@01D7DA28.14657760]Features: * Atomic resolution down to 65 pm in both TEM and STEM mode as the column contains a probe and image corrector * Monochromatic gun + EELS spectrometer, which combine deliver an energy resolution of 120 meV at 80kV – great for plasmons and oxidation state studies * SuperX EDX detector, high signal to n oise ration due to a 4-quadrant detector set up * Flexible high tension range: 300, 200, 80, 60kV. Lower kVs are ideal for electron-beam sensitive samples Contact: Rosa E Diaz– rdiazri(a)purdue.edu<mailto:rdiazri@purdue.edu> (Staff in Charge), BRK 1269A ***To post an announcement in the weekly BNC E-news please send to Sangeeta Abrol @ abrols(a)purdue.edu***<mailto:abrols@purdue.edu***> Follow us on Facebook and Twitter [Facebook icon]<https://www.facebook.com/nano.purdue.edu/> [Twitter icon] <https://twitter.com/BNCPurdue>

1 0

Notice - Solid Material Going Down Laboratory Sink Drains
by Reger, Ronald K 12 Nov '21

12 Nov '21

Birck Users, Please make every effort to keep solids (pipette tips, glass or anything else) from going down the laboratory sink drains. This may result in the shutting down of the labs until repaired and a disruption to research. Please see the picture below. [cid:image001.jpg@01D7D79D.6D5085F0] Thank You, Stephen Birck Safety Manager

1 0

FW: BNC E-news: Week of November 8th, 2021
by Abrol, Sangeeta Saddul 08 Nov '21

08 Nov '21

[cid:image006.png@01D7401C.A3F567B0] Seminars /Workshops / Events BNC Faculty Seminar Series (For Faculty Only) Dr. Caitlin Proctor Assistant Professor of Agricultural and Biological Engineering & Environmental and Ecological Engineering (by courtesy) at Purdue University Thursday November 11th, 2021 12:00pm – 1:00pm, Zoom Topic : Biofilms in Everyday Life Workshop Announcement LakeShore Cryotronics and Neil Dilley are hosting a workshop to highlight some new equipment in the Birck Spintronics Lab and present results from beta phase testing. These include: * LakeShore Synchronous Source-Measure system M81: sensitive, flexible, automated AC+DC electrical measurements system for, e.g., Hall effect (with gating), differential conductance, ESD-sensitive materials, and more. * LakeShore FastHall M91: DC resistance system with automated permutation of wiring for Hall effect and resistance measurements to quickly determine Hall coefficient, carrier concentration, carrier type and mobility. Both of these equipment are installed on the PPMS DynaCool cryostat in the Birck Spin Lab which provides an environment with T = 1.8 - 400 K and fields up to 9 tesla. We will also review other magnetic characterization capabilities and give lab tours during the lunch hour. November 10, 2021 10 AM - 3 PM In person @ BRK Rm 2001 Virtual: MS Teams link will be sent to registered attendees Please register here: https://tinyurl.com/vywnbte9 Thanks, Neil R. Dilley, Ph.D. Research Scientist Birck Nanotechnology Center , Rm 1010 1205 West State St. West Lafayette, IN 47907-2057 765-496-6080 Distinguished Seminar Series: Purdue Mechanical Engineering The Viskanta Fellowship Lecture Dr. Alan McGaughey Trustee Professor of Mechanical Engineering Carnegie Mellon University Wednesday, November 10, 2021 3:00 PM – ME1012 Topic: Integrating Theory, Simulation, Machine Learning, and Experiments to Solve Heat Transfer Problems Seminar for Neurotrauma and Diseases<https://vet.purdue.edu/cpr/Seminar%20for%20Neurotrauma.php> Sponsored by Plexon Neurotechnology Systems Wednesdays | 4-5pm | via Zoom 2021 Birck Nanotechnology Center Research Image Contest Sponsored by NSAC and Birck leadership - $600 in prize awards for student entries Please share your research images which showcase the beauty you’ve observed around you at Birck! All members of the Birck community – students, staff, and faculty – are welcome to submit their images that can include not only research images but also photos of life here at Birck. For research images, we ask that you also write a short paragraph explaining what we are looking at and why it is significant to you. We will assemble a panel of judges and announce awards at the BNC Holiday Party in December, and student entries are eligible to win: $300 for 1st place $200 for 2nd place $100 for 3rd place You can submit multiple images anytime between now and November 30, 2021 to a new MS Teams channel we have set up for the image contest, see link below: https://teams.microsoft.com/l/channel/19%3abf8be291dbb9468b831b6e0de523b930… If you have issues or questions, please email Neil Dilley at ndilley(a)purdue.edu<mailto:ndilley@purdue.edu> . Happy image hunting! [Text, logo, company name Description automatically generated] and the Birck Nanotechnology Center [A picture containing text, indoor, seat Description automatically generated][A picture containing background pattern Description automatically generated][A group of colorful feathers Description automatically generated with low confidence][A picture containing indoor, birthday, office, chocolate Description automatically generated][A picture containing tool Description automatically generated][cid:image015.png@01D7BEA6.8D0C2170][A close-up of a person's chest Description automatically generated with medium confidence] Birck Events<https://www.purdue.edu/discoverypark/birck/events/index.php> and Birck News<https://www.purdue.edu/discoverypark/birck/news/index.php> Thanksgiving Luncheon (BNC Staff only) [cid:image002.jpg@01D7D4AF.FB67FB20] JOB POSTINGS: R&D Senior Design Engineer at Alpha & Omega Semiconductor Alpha & Omega Semiconductor is looking for a Senior Design Engineer who will work in a dynamic team environment at AOS headquarter located in Sunnyvale, CA. The main responsibility of this position is to work with marketing/process integration/product engineering group to develop silicon power device technology. Application link: Senior Design Engineer - Sunnyvale, CA - Alpha & Omega Semiconductor Jobs (applicantpro.com)<https://caosmd.applicantpro.com/jobs/2050960.html> R&D Senior Process Integration Engineer at Alpha & Omega Semiconductor Alpha & Omega Semiconductor is looking for a Senior Process Integration Engineer who will work in a dynamic team environment at AOS Semiconductor's leading technology fabrication facility (Jireh Semiconductor) located in Hillsboro, Oregon. The focus of this position is to work with device/process module/product engineering group to develop silicon power device process technology and improve existing technology yield. Primary responsibilities are to process flow implementation, electrical characterization (failure analysis), and wafer level testing yield monitoring. Application link: Entry Level MS or PHD Process Integration R&D Engineer - Hillsboro, OR - Jireh Semiconductor Jobs (applicantpro.com)<https://aosmd.applicantpro.com/jobs/1949301.html> Opening in OxideMEMS lab Sunil Bhave’s OxideMEMS Lab <https://engineering.purdue.edu/oxidemems/publications.html> explores inter-domain coupling in Opto-mechanical, Spin-Acoustic and Atom-MEMS devices. PhD, Postdoctoral and Research Associate positions are available in these areas: · Superconducting qubit and cryo-CMOS circuits · Resonators and switches · MEMS-engine for LIDAR · Piezo-on-nitride transducers for atom-mechanics Expertise in many and most of Microfabrication, PiezoMEMS, Photonics, Quantum Mechanics, Microwave circuits, PCB design, ADS/HFSS, Comsol, Python and Labview is required. Please send CV to bhave(a)purdue.edu<mailto:bhave@purdue.edu> if you are interested.link<http://interested.link> [cid:image020.png@01D7BEAF.D3C3AE90] Postdoctoral Position – Nonlinear Nanophotonics – Deadline Nov.15, 2021 Fliers with more information posted on the bulletin boards. An electronics engineer position is available in the Smart Sensing and Electronics Systems Branch of NASA, located at the Glenn Research Center (GRC). The focus of the successful candidate will be on research, design, development, simulation and testing of sensing devices, transducers, components, and related circuitry for application to aerospace research and development endeavors. See https://www.usajobs.gov/GetJob/ViewDetails/615488500 for details. Contact Dallas Morisette morisett(a)purdue.edu<mailto:morisett@purdue.edu> for more detail Nanofabrication Engineer at Microsoft Microsoft Azure Quantum at Station Q Purdue seeks a nanofabrication engineer in the device fabrication group. You will join a multi-disciplinary team of theoretical and experimental physicists, materials scientists, and hardware and software engineers working at the forefront of quantum computing. You should have experience in device fabrication and characterization techniques. Our work at Station Q Purdue in West Lafayette, Indiana is part of global Microsoft Quantum research effort in topological quantum computing. Responsibilities: Responsibilities include develop, operate, and characterize semiconductor device fabrication processes in the Birck Nanotechnology Center cleanroom facilities located at Purdue University. Accurately documenting and effectively communicating all procedures and results to the larger research group is an essential aspect of the position. The candidate may also be required to assist in the maintenance of equipment. Qualifications: A successful candidate must have: • • Master’s degree in Physics, Materials Science or Electrical Engineering. Other engineering disciplines will also be considered. • • Hands-on experience working with some or all of the following semiconductor process areas: lithography, thin film deposition and etch. • • Ability to follow protocols to operate sophisticated experimental equipment and to safely work with industrial solvents, acids, and bases in a cleanroom environment • • Excellent written and oral communication skills. • • Proficiency at accurately documenting processes and protocols. • • Strong attention to detail and good organizational skills. • • Strong desire to work in a collaborative international team. Preference may be given to candidates with the following additional qualifications: • • Industry experience in semiconductor device process integration. • • Expertise in thin film characterization, both structural and electrical. • • Familiarity with design and layout tools for chip scale devices. Please send your resume to flgriggi(a)microsoft.com<mailto:flgriggi@microsoft.com>, selected candidates will be contacted for interviews. NSAC Fab Forum There will be no NSAC Fab Forum this Tuesday NSAC Coffee Hour There will be no NSAC Coffee Hour this Friday Birck Nanotechnology Center Advanced Capabilities Helios G4 UX Dualbeam SEM/FIB [Helios 5 UC DualBeam for Materials Science]Features: * Phoenix ion column with accelerating voltage range from 500V – 30kV and current range from 0.1pA-65nA * Electron beam resolution of 0.6 nm at 30kV * STEM detector with 0.7nm resolution at 1kV * EDX detector * Great for cross section imaging and chemical characterization, patterning, TEM sample prep, and 3D reconstruction Contact: Rosa E Diaz– rdiazri(a)purdue.edu<mailto:rdiazri@purdue.edu> (Staff in Charge), BRK 1237 ***To post an announcement in the weekly BNC E-news please send to Sangeeta Abrol @ abrols(a)purdue.edu***<mailto:abrols@purdue.edu***> Follow us on Facebook and Twitter [Facebook icon]<https://www.facebook.com/nano.purdue.edu/> [Twitter icon] <https://twitter.com/BNCPurdue>

1 0