January 2013 - Che-student-staff-list

ChE Director of Graduate Studies
by Varma, Arvind 28 May '14

28 May '14

Dear Colleagues, After serving since January, 2009 as our School's Director of Graduate Studies (DGS), Prof. Litster recently requested relief from this service, to devote more time to his teaching and research. Reluctantly, I accepted his request. On behalf of our School's faculty, staff and graduate students, I express deep gratitude to Jim for his outstanding service in this role. Simultaneously, I am pleased to inform that, effective July 1, Prof. Mike Harris has accepted to become our School's DGS. In this capacity, he will advise the graduate students and oversee the operations of the graduate office. I am grateful that Mike has accepted this position of leadership and service. Sincerely, Arvind Varma R. Games Slayter Distinguished Professor Jay and Cynthia Ihlenfeld Head of Chemical Engineering Purdue University

1 1

Seminar Announcement 12/4 - Dr. Reklaitis
by Ewing, Virginia G 28 Jan '13

28 Jan '13

Purdue University School of Chemical Engineering GRADUATE SEMINAR SERIES Dr. G.V. Rex Reklaitis Burton and Kathryn Gedge Distinguished Professor of Chemical Engineering "Progress and Prospects for the ERC on Structured Organic Particulate Systems" December 4, 2012 9:00-10:15 a.m. FRNY G140 Reception at 8:30 a.m. in Henson Atrium Abstract: Launched in July 2006 with support from the NSF, over 30 industrial partners, and the four hosting universities, the Center aspires to be the national focal point for science-based development of structured organic particle-based products and their manufacturing processes. Such products, which are comprised of multi-component organic systems whose performance depends on microstructure, are widely used to deliver active substances at pre-determined rate and in specific environments. This family of products is manufactured using similar processes across a number of industries, including pharmaceuticals, nutraceuticals, agricultural agents, detergents and foods. The engineering of such products encounters common technical limitations: * Solid state physics that is poorly understood * "Soft" materials that are delicate - High shear/high temperature conditions must be avoided * Constitutive behavior has a hierarchy of scales and substantial complexity The manufacturing of these products has been largely carried out in batch mode, with limited on-line sensing and automation, and limited availability of reliable engineering predictive models to support process design, scale-up and operation. In this presentation we will outline the technical objectives and organization of the research plan under which the Center has been operating. Highlights will be given of representative research projects in areas such as understanding of material properties, predictive modeling of key unit operations, knowledge management, on-line sensing (PAT) and real time process management. Progress on the realization of the three test beds specifically targeted for production of solid oral dosage pharmaceuticals and the steps taken towards the commercialization of one of these, a continuous automated tableting line, will be reviewed.

2 3

Disregard previous email
by Davenport, Jason W 25 Jan '13

25 Jan '13

The previous email about the cylinder cages was sent to the wrong list in my error. Sorry for any confusion. Thank you. Jason Davenport Shipping/Receiving Clerk Chemical Engineering Forney Hall of Chemical Engineering Room G134A Purdue University (765)494-4084 jwdavenp(a)purdue.edu

1 0

Gas cylinder cages full
by Davenport, Jason W 25 Jan '13

25 Jan '13

Once again, all non-flammable cylinder cages are full. There is no room for empty cylinders at this time. Thanks. Jason Davenport Shipping/Receiving Clerk Chemical Engineering Forney Hall of Chemical Engineering Room G134A Purdue University (765)494-4084 jwdavenp(a)purdue.edu

1 0

Swagelok Seminar on February 1st
by Zvinevich, Yury 22 Jan '13

22 Jan '13

Dear All, During this 1 hour seminar you will get information how to use Swagelok fittings that is of great importance for your work. Right use and handling of Swagelok fittings can affect results of your experiments, save time and has also direct relation to the safety issues in your lab. Read, please, this flyer below. Thank you, Yury Zvinevich ************************************************************************************************************* [VBEsignature%20blue_TN.jpg] SWAGELOK TUBE FITTING INSTALLATION SEMINAR DATE: February 1, 2013 TIME: 1:30-3:00 pm LOCATION: FRNY 1043 **FREE** **FREE** **FREE** **FREE** Seminar Outline: Explain the main advantages of using tubing instead of pipe Provide an overview of good tubing installation practices Discuss Swagelok Tube Fitting installation instructions Discuss retightening instructions Discuss pre-swaging instructions Fitting Products to Make the Job Easier Port connectors Tube adapters Plugs and caps Positionable fittings Ferrule packs Insert Tube Bender components ***Registration is required*** Seating limited to 30 attendees Send registration email containing your name, phone, and email to: MIKE.MERKEL(a)SWAGELOK.COM<mailto:MIKE.MERKEL@SWAGELOK.COM> TODAY Please note that if there are more than 30 attendees that register, another course will be offered in the near future. You will be notified of the next session. Yury Zvinevich School of Chemical Engineering Purdue University Forney Hall of Chemical Engineering, Room G111A 480 Stadium Mall Drive West Lafayette, IN 47907-2100 Tel.: (765) 494-9368 Fax: (765) 494-0805 E-mail: yuryzv(a)purdue.edu<mailto:yuryzv@purdue.edu> https://engineering.purdue.edu/ChE/Directory/Staff/yuryzv.html

1 0

Solar Seminar speaker Bryan Boudouris January 24 3:30 BNC 2001
by Murray, Chris L 17 Jan '13

17 Jan '13

-----Original Message----- From: Black, Nancy Lee Sent: Thursday, January 17, 2013 11:33 AM To: Black, Nancy Lee Subject: Solar Seminar speaker Bryan Boudouris January 24 3:30 BNC 2001 Could you each post and disburse this Seminar announcement for us? You are invited to join us at Birck Nanotechnology Center for the next Solar Seminar Series speaker Bryan Boudouris Topic: Design of Optoelectronically-active Polymers for Organic Photovoltaic Applications Thanks, Nancy Black Secretary Birck Nanotechnology Center 1205 West State Street West Lafayette, IN 47907-2057 (765) 494-8675 Email: blackn(a)purdue.edu

1 0

ARPA-E Energy Innovation Summit
by Varma, Arvind 15 Jan '13

15 Jan '13

Dear Colleagues, A quick note about the upcoming ARPA-E Energy Innovation Summit, to be held Feb 25-27 in Washington, DC of which you may already be aware. The registration fee is high but not exorbitant, $695 for Advance Registration (Deadline January, 25, 2013). More details are available at: http://www.arpae-summit.com/Home . Is anyone from our School planning to attend? Pl let me know - thanks. Arvind Varma

1 0

Seminar Announcement 1/15 - Prof. Yue Wu
by Ewing, Virginia G 14 Jan '13

14 Jan '13

REMINDER -- Purdue University School of Chemical Engineering GRADUATE SEMINAR SERIES Prof. Yue Wu School of Chemical Engineering "Advanced Nanostructures for Thermoelectric Applications" January 15, 2013 9:00-10:15 a.m. FRNY G140 Reception at 8:30 a.m. in Henson Atrium Abstract: According to a Lawrence Livermore National Lab survey in August 2010, nearly 57.8% of the total generated energy in US in 2009 was rejected into the environment, the majority being from power plants, transportation and manufacturing industries. Most of this waste heat is considered low-grade (40°C - 200°C), a level which is generally considered economically infeasible to recover at a high efficiency; consequently, it is typically dumped into the environment, mainly the aquatic ecosystem (especially for power plants and manufacture industries), through various cooling processes. Heat pollution can have a great negative influence on the surrounding aquatic ecosystems and these system inefficiencies also lead to higher energy costs overall. The rapid development of thermoelectric materials in the past decade has brought a new hope to the possibility of directly converting waste heat back to electricity based on the Seebeck effect. The performance of thermoelectric materials can be rated through a dimensionless quantity called figure of merit or ZT (ZT= σS2T/κ), where σ, κ, and S stand for electrical conductivity, thermal conductivity, and Seebeck coefficient, respectively. T is the average temperature between the hot and the cold sides. Recent efforts on the development of nanostructured thermoelectric materials from nanowires and nanocrystals show comparable or superior performance to bulk crystals with the same chemical compositions because of the dramatically reduced thermal conductivity due to phonon scattering at nanoscale surfaces and interfaces. However, critical gaps still remain that prevent scalable, practical manufacture and wide deployment of thermoelectric devices. First, most conventional thermoelectric materials, including both bulk crystals and nanostructured materials, are based on tellurides, antimonides, germanium, and rare earth element doped compounds. The bulk crystals or the composite disks fabricated by compressing/ sintering nanomaterials are micro-machined into millimeter-thick pillar structures; such processes impose a high demand on these expensive, scarce, and sometimes toxic materials. Further, during manufacture, much material is wasted, causing adverse environmental impact and high recycling costs. Second, the majority of nanostructure-based thermoelectric research is limited to lab-scale device fabrication and measurements performed on a single nanowire or a thin film of nanocrystals or heterostructures with maximum dimensions of hundreds micro-meters; this is mainly due to the lack of scalable and reproducible synthesis. In most cases, only milligrams of these nanomaterials can be obtained and there are large variations between different batches of samples. In the past three years, we have developed a transformative approach to address these challenges: (1) we have pioneered low cost and scalable solution-phase growth methods to mass produce thermoelectric nanowires and nanowire heterostructures to match the physical and economic magnitudes of energy use and economical sustainment in the manufacture/recycling; (2) we have enforced the compatibility and integratability of our material synthesis and process with existing manufacture infrastructure. Specifically, solution-phase production of nanomaterials with uniform morphology, size, and properties at industrial scale (at least kilogram level in relatively short period of time) using industrial standard reactors has been achieved so that the bulk thermoelectric properties can be measured on the bulk nanocomposite disks fabricated by spark plasma sintering or hot pressing the nanopowders. Notably, ball milling technique has been used to make bulk nanocomposite thermoelectric devices from the nanopowders with enhanced ZT, however, it is typically considered as an energy intensive process and lacks of good control in many key parameters. As a long-term goal, we have also explored the non-toxic and abundant complex metal oxide and sulfide based new thermoelectric materials for various temperature ranges. Traditional tellurides, antimonides, germanium, and rare earth doped compounds based thermoelectric materials exhibit a few obvious drawbacks, including the material instability (oxidation or decomposition) at high temperature, environmental concern of toxic heavy metals, and high recycling cost. Bio: Prof. Yue Wu graduated with best thesis award from Prof. Yitai Qian's group at University of Science and Technology of China (USTC), Hefei, Anhui, P. R. China, with a bachelor's degree in Chemistry in June, 2001. Then, he went to Harvard University and studied for his doctoral degree under the supervision of Prof. Charles M. Lieber. His Ph.D. research achievement on nanowire-based nanoelectronic devices has been featured by many public press releases, including Chemical and Engineering News, MRS Bulletin, Nature magazine, Materials Today magazine, Technology Review, and several awards, for example, Materials Research Society (MRS) Graduate Student Gold Award and Excellent Overseas Chinese Graduate Student Award from the Scholarship Council of the Ministry of Education in China. Prof. Wu received his doctoral degree in June, 2006 and was awarded the prestigious Miller Fellowship from University of California at Berkeley. At Berkeley, he worked with Prof. A. Paul Alivisatos for three years on nanostructure-based photovoltaic solar cells. In August 2009, Prof. Yue Wu joined the School of Chemical Engineering at Purdue University. His research is focusing on the improvement of energy efficiency through waste heat recovery into electricity using advanced nanostructured thermoelectric materials. In the past three years, Prof. Yue Wu's research has addressed many critical gaps in the field of thermoelectric and has led to many publications on high-profile journals, including five papers on Nano Letters (impact factor 13.198), two invited review articles, and one feature articles. His personal H-index is 20 with a total citation over 3800 times. Among his most highly cited publications, there are two on Nature (with citations of 630 and 527 times each) and two on Nano Letters (with citations of 495 and 472 times each). His innovative research has received many public media exposures, including Chemical & Engineering News, National Public Radio, etc. His research has also generated six pending patent applications filed by Purdue Research Foundation with two of them being pending for license and significant industrial collaborations with the world-leading companies like Intel, DuPont, Kaiteki Institute (by Mitsubishi Chemical), Electrical Power Research Institute (EPRI), DOW Chemical, and AZDEL. As a young faculty member, he is also the recipient of Air Force Summer Faculty Fellowship for three consecutive years (2010, 2011, and 2012), DuPont Young Professor Award, and he is one of the only two Purdue Nominees for the Packard Foundation Fellowship in 2010. His contribution to technology development has also been recognized by Nanotechnology Venture Competition Award (both individual award and team award as team leader) sponsored by the State of Indiana, Purdue University, and University of Notre Dame. His research has also received a lot of global attention/recognition and he has been invited as one of the only two invited speakers from United States (totally only ten worldwide) for Japan Nano 2013 sponsored by Japan National Institute of Materials Sciences and Japan Ministry of Education.

1 0

2013 Staff Excellence Award Nomination Request
by Farmus, Cristina D 14 Jan '13

14 Jan '13

Good Morning, On behalf of the Staff Awards Committee in the School of Chemical Engineering, I am glad to invite nominations for the 2013 ChE Staff Excellence Award. The criteria, nomination form and details are attached. Brief outline of the nomination process: Any ChE faculty member, staff, graduate or undergraduate student can nominate any ChE permanent staff member. A nominator or contributor with a letter of support can endorse only one candidate. Nominations should be submitted to Cristina Farmus at cfarmus(a)purdue.edu<mailto:cfarmus@purdue.edu> by March 29th, 2013. Nominations should not be more than 2 pages long and need to include specific examples. Two letters of support are required (one page maximum), of which at least one must be from someone in our School. The award will be presented at the May 2013 appreciation reception. Decision: The decision will be made by the ChE Staff Awards Committee and communicated to all School employees and students. Sincerely, Cristina Cristina Farmus Administrative Director Chemical Engineering Purdue University 765 494 0027 cfarmus(a)purdue.edu<mailto:cfarmus@purdue.edu>

1 0

Outstanding Service Scholarship Nominations Request
by Bowman, Debra J 14 Jan '13

14 Jan '13

Dear all Please see email below from Audeen Fentiman regarding Graduate Student Outstanding Service Award, including criteria. Graduate students - you may self nominate by sending an email briefly outlining your service contributions with a CV attached. Faculty, staff, graduates students - you may nominate any (other) graduate student by sending a short email with the reason for the nomination. Deb Bowman will then request a CV from the nominated student. NOMINATIONS ARE REQUIRED BY JANUARY 23RD. If we have more than one nomination, the graduate student awards committee will meet to choose one nominee to forward to the College of Engineering. Please send all correspondences to Deb Bowman (dbowman1(a)purdue.edu) Regards, Mike Harris Director of Graduate Studies Professor of Chemical Engineering Associate Dean of Engineering for Undergraduate Education College of Engineering Purdue University ****** MEMO TO: Graduate Chairs and Administrators FROM: Audeen Fentiman DATE: January 8, 2013 SUBJECT: Outstanding Service Scholarship Nominations Requested The College of Engineering awards an Outstanding Service Scholarship of $2,000 to a graduate student in each school who has provided outstanding service to the graduate student community, the School, the College, and/or the University. We ask each school to nominate one candidate for the Outstanding Service Scholarship. The nomination is due to Julie Lahner (jlahner(a)purdue.edu) by noon on Friday, February 1, 2013. Nominees should meet the following criteria: 1. Be pursuing a graduate degree (M.S. or Ph.D.) in your School 2. Be among the top academic performers in the School (not necessarily have a 4.0 GPA) 3. Will not be graduating before December 2013 4. Have been enrolled in your graduate program for at least 2 years at the time of the nomination 5. Have contributed over time to the quality, reputation, or success of the graduate student community, School, College, and/or University. Nominations will consist of a letter from the Head of the School or the Graduate Committee Chair containing the following: * A recommendation that this student be selected for the Outstanding Service Scholarship * Factual information showing that the student meets each of the 5 criteria listed above * A brief description of the process by which the student was selected We greatly appreciate your efforts in supporting this recognition of a student from your School. cc: Heads of Schools

1 0