April 2019 - Msepostdoc-list

MSE Merchandise Last Chance Closing Today!
by Coar, Stacey L 17 Apr '19

17 Apr '19

Hello Everyone, This is a reminder that the online MSE store will close tonight, April 17th at Midnight. PUMA is selling a short sleeve T-shirt, long sleeve T-shirt, 1/4 zip pullover, and two types of School of Materials Engineering polos. As I said before I will send an email when the shirts are ready to be picked up from Stacey, if you selected that delivery option, which should be around April 25th. Here is the link to the Freckles Online Store: https://shop.frecklesgraphics.com/purdue_materials_science_and_en/shop/home [https://images.inksoft.com/images/publishers/563/stores/purdue_materials_sc…]<https://shop.frecklesgraphics.com/purdue_materials_science_and_en/shop/home> Purdue Materials Science and Engineering<https://shop.frecklesgraphics.com/purdue_materials_science_and_en/shop/home> shop.frecklesgraphics.com Thank You, Harley Rowland PUMA Treasurer hrowlan(a)purdue.edu<mailto:hrowlan@purdue.edu> 832-922-9108

1 0

FW: Seminar Notice for Kyungjean Min's Ph.D. Final Exam. Seminar, Wednesday, April 17, at 1:30 p.m., in ARMS 1021. Exam same day at 2:30 p.m., in ARMS 2009. "Impurity Control and Analysis of Ultra-Pure Gallium for Increasing Mobility in Gallium Arsenide G
by Son, Rosemary E 16 Apr '19

16 Apr '19

Please consider attending the following: MATERIALS ENGINEERING SEMINAR "Impurity Control and Analysis of Ultra-Pure Gallium for Increasing Mobility in Gallium Arsenide Grown by Molecular Beam Epitaxy" By Kyungjean Min Purdue MSE Ph.D. Final Exam Advisor: Professor Kevin P. Trumble and David R. Johnson ABSTRACT High mobility 2DEG (two-dimensional electron gas) confined in GaAs is a good platform to understand correlated electron systems and a promising candidate for qubit devices. For example, the non-Abelian feature of Fractional Quantum Hall state enabling topological quantum computation is only found in GaAs with high mobility. Theoretical calculations have shown that the mobility is inversely proportional to impurities in GaAs/AlGaAs heterstructures grown by Molecular Beam Epitaxy (MBE). In recent MBE experiments, the source Ga was found to be more important in the limitation of mobility than Al and As. A high mobility of 35 million cm2/Vs was recently observed when an 8N Ga (total nominal impurity concentration of ~10 ppb) source was used compared to 25 million cm2/Vs for a 7N Ga source. In addition, significant mobility increase was observed after in-situ distillation of the source Ga before growth. In order to clarify the mechanism of how the distillation contributed to the Ga purification, thus resulting the mobility increase, the MBE in-situ distillation was analyzed by molecular distillation theory. Evaporation behavior of solvent Ga was analyzed including effects of evaporation from a crucible with receding liquid depth. Then impurity removal through molecular distillation was analyzed with molecular evaporation kinetics. The remaining 7N and 8N Ga after in-situ MBE distillation and growth were elementally analyzed by ICP-MS (Inductively Coupled Plasma Mass Spectrometry) and compared with analyses of the starting 7N and 8N Ga from same lots. Due to the increased detection limit of ICP-MS in metal analysis, the concentrations of most impurity elements reached the detection limit of ~1-10 ppb. However, unusual high concentration of 690 ppb Ge was found in the 7N Ga, exceeding the nominal concentration of 7N (100 ppb). Significant decrease in Ge concentration was found in the comparison of initial ultra-pure Ga and remaining Ga for both grades of 7N and 8N. The significant Ge losses cannot be explained by atomic Ge evaporation due to the low vapor pressure of Ge. However, a hypothesis Ge evaporation as GeO(g) by Ge active oxidation was proposed. In order to test the active oxidation of very dilute Ge in Ga in the MBE conditions with very low P(O2), the equilibrium P(GeO)-P(O2) vapor species diagram was calculated from thermodynamics. The analysis shows that even very dilute Ge in Ga of ~ 1 ppm concentration can be actively oxidized in the extremely low P(O2) of MBE. In order to prove active oxidation of Ge, molecular distillation of 7N Ga was performed in a specially constructed high vacuum chamber. The 7N Ga with unusual high Ge concentration of 440 ppb (by GDMS analysis) was distilled for 16 h at 1360 K under the starting P(O2) of 3 x 10-6 atm and the total pressure of ~ 10-5 torr. The chamber vacuum was monitored by Residual Gas Analyzer (RGA) and the residual Ga after 16 h distillation was analyzed by GDMS. In the GDMS analysis, significant Ge loss was found from 440 ppb to below the detection limit of 10 ppb, confirming Ge active oxidation hypothesis. The oxygen-assisted impurity removal in distillation also may be applicable to other impurities with high vapor pressure gaseous oxide, but low vapor pressure itself such as Al, Si and Sn. Date: Wednesday, April 17, 2019 Time: 1:30 P.M. Place: ARMS 1021

1 0

Seminar Reminder for Eduard Caicedo-Casso's Ph.D. Final Exam. Wednesday, April 17, in HAMP 2113, at 3:00 p.m. Exam same day, in ARMS 2237, at 4:00 p.m. " Shear Rheometry Protocols to Advance the Development of Microstructured Fluids"
by Son, Rosemary E 16 Apr '19

16 Apr '19

Please consider attending the following: MATERIALS ENGINEERING SEMINAR "Shear Rheometry Protocols to Advance the Development of Microstructured Fluids" By Eduard A. Caicedo-Casso Purdue MSE Ph.D. Final Exam Advisor: Professor Kendra A. Erk ABSTRACT The successful transformation of microstructured (complex) fluids into commercial products often relies on the ability to understand and control their rheological behavior. However, the implementation of rheological frameworks to drive business decisions is challenging. Majority of these fluids contain a wide variety of mesoscopic phases that contribute to a convoluted and distinct rheological response. Therefore, it is essential to combine flow characterization techniques with proper physical measurements to fully elucidate the root causes of the rheological behavior of microstructured fluids. In this order of ideas, this doctoral dissertation shows the development of three protocols of applied shear rheology. These protocols aim to advance the transformation of novel self-assembly block copolymers, concentrated surfactant solutions, and water-soluble polymers into real products. A robust set of experimental evidence is used to bridge the mesoscopic signatures of each microstructured fluid to their flow behavior. This talk focuses on the demonstration of the critical factors (chemical, physical, or thermodynamical) that could potentially drive the rheological behavior thus the successful transformation of the studied microstructured fluids. The novelty of this work lies in the integration of simple rheological measurements, scattering characterization techniques, mass transfer measurements, and advanced rheo-flow velocimetry to draw meaningful conclusions relevant to current industrial demands Date: Wednesday, April 17, 2019 Time: 3:00 P.M. Place: HAMP 2113

1 0

Seminar Notice for Brenden Hamilton's Preliminary Exam Seminar. Thursday, April 25, at 10:30 a.m., in ARMS 3115. " Equilibrium Shock Approximation Methods and Their Applicability to Simulate Complex Shock Induced Phenomenon"
by Son, Rosemary E 16 Apr '19

16 Apr '19

Please consider attending the following: MATERIALS ENGINEERING SEMINAR "Equilibrium Shock Approximation Methods and Their Applicability to Simulate Complex Shock Induced Phenomenon" By Brenden W. Hamilton Purdue MSE Ph.D. Preliminary Exam Advisor: Professor Alejandro Strachan ABSTRACT The thermo-mechanical and chemical response of materials under shock loading conditions is an important area of research for metallurgy, energetic materials, chemistry, geoscience, and astrophysics. Both experimental and theoretical research has focused on the role of shock in inducing phenomenon such as plasticity, phase transformation, failure, and chemical reactions. Due to the ultrafast timescales of these phenomena, molecular dynamics (MD) simulations are widely used to study shock. However, non-equilibrium, direct shock simulations are limited by the achievable length and time scales, with many shock-induced phenomena occurring on longer timescales than are achievable. This work aims to compare two computational approaches to simulate a material under shock loading conditions behind the shock front: The Multi-Scale Shock Technique (MSST) and the Hugoniostat. The former is derived from an extended Lagrangian with a shock pressure determined from the Rankine-Hugoniot Jump Conditions, confining the system to states along the Rayleigh Line (single shock velocity). The latter approach employs coupled volume and heat flow equations of motion that dynamically compresses the system to a desired shock pressure while varying energy to conserve the jump conditions. Both methods will be compared using the underlying theory as well as with complex test cases. Simulations are conducted for the energetic material TATB to compare shock induced volume expanding reactions to Zel'dovich-von Neumann-Döring Theory (ZND). Additionally, shock induced densification of the highly porous metal-organic framework MOF5 will be studied and compared to non-equilibrium shock simulations. Date: Thursday, April 25, 2019 Time: 10:30 A.M. Place: ARMS 3115

1 0

LAST CHANCE: MSE Student Night April 25, 2019, Please Respond
by Coar, Stacey L 15 Apr '19

15 Apr '19

Good morning, Student night is just around the corner, this is your last chance to sign up for MSE Student Night on April 25th from 6:30 – 8pm. This event is a great opportunity to network with your peers, industry professionals, faculty and staff, and food will be provided. This is also a great opportunity to see this year’s senior design posters and the press boxes at Ross-Ade! RSVP at MSE student night 2019 survey<https://purdue.ca1.qualtrics.com/jfe/form/SV_bHkvgdmw35UcSI5> by this Friday, April 19th if you have not taken the survey. Important Info: · RSVPS are required (even for seniors) · Business attire, photos will be taken with Sponsors · Student and Faculty award presentations will be presented during the program [cid:image001.jpg@01D4F374.0ACE86D0] Stacey Stacey Coar Secretary/Development Assistant School of Materials Engineering Purdue University Neil Armstrong Hall of Engineering 701 West Stadium Ave. Room 2300 West Lafayette, IN 47907 765-494-4100 scoar(a)purdue.edu<mailto:scoar@purdue.edu>

1 0

Seminar Reminder for Reaz Chowdhury's Ph.D. Final Exam Seminar. Monday, April 15, at 1:00 p.m., in HAMP 2102. Exam same day at 2:00 p.m., in ARMS B197. "Roll-to-Roll Fabrication of Cellulose Nanocrystal Nanocomposite for Gas Barrier and Thermal Manageme
by Son, Rosemary E 12 Apr '19

12 Apr '19

Please consider attending the following: MATERIALS ENGINEERING SEMINAR "Roll-to-Roll Fabrication of Cellulose Nanocrystal Nanocomposite for Gas Barrier and Thermal Management Applications" By Reaz A. Chowdhury Purdue MSE Ph.D. Final Exam Advisor: Professor Jeffery P. Youngblood ABSTRACT Cellulose nanocrystals (CNCs) and its composite coatings may impart many benefits in packaging, electronic, optical, etc. applications; however, large-scale coating production is a major engineering challenge. To fill this knowledge gap, a potential large-scale manufacturing technique, roll-to-roll reverse gravure processing, has been described in this work for the manufacture of CNC and CNC-poly(vinyl alcohol) (PVA) coatings on a flexible polymer substrate. Various processing parameters which control the coating structure and properties were examined. The most important parameters in controlling liquid transfers were gravure roll, gravure speed, substrate speed, and ink viscosity. After successful fabrication, coating adhesion was investigated with a crosshatch adhesion test. The surface roughness and morphology of the coating samples were characterized by atomic force microscopy and optical profilometer. The Hermans order parameter (S) and coating transparency were measured by UV-Vis spectroscopy. The effect of viscosity on CNC alignment was explained by the variation of shear rate, which was controlled by the micro-gravure rotation. Finally, the CNC alignment effect was investigated for gas barrier and thermal management applications. In packaging applications, cellulose nanomaterials may impart enhanced gas barrier performance due to their high crystallinity and polarity. In this work, low to superior gas barrier pristine nanocellulose films were produced using a shear-coating technique to obtain a range of anisotropic films. Induction of anisotropy in a nanocellulose film can control the overall free volume of the system which effectively controls the gas diffusion path and hence, controlled anisotropy results in tunable barrier properties. The highest anisotropy materials showed a maximum of 900-fold oxygen barrier improvement compared to the isotropic arrangement of nanocellulose film. The Bharadwaj model of nanocomposite permeability was modified for pure nanoparticles, and the CNC data were fitted with good agreement. Overall, the oxygen barrier performance of anisotropic nanocellulose films was 97 and 27 times better than traditional barrier materials such as biaxially oriented poly(ethylene terephthalate) (BoPET) and ethylene vinyl alcohol copolymer (EVOH), respectively, and thus could be utilized for oxygen-sensitive packaging applications. The in-plane thermal conductivity of CNC - PVA composite films containing different PVA molecular weights, CNC loadings and varying order parameters (S) were investigated for potential application in thermal management of flexible electronics. Isotropic CNC - PVA bulk films with 10-50 wt% PVA solid loading showed significant improvement in thermal conductivity compared to either one component system (PVA or CNC). Furthermore, anisotropic composite films exhibited in-plane thermal conductivity as high as ~ 3.45 W m-1 K-1 in the chain direction, which is higher than most polymeric materials used as substrates for flexible electronics. Such an improvement can be attributed to the inclusion of PVA as well as to a high degree of CNC orientation. The theoretical model was used to study the effect of CNC arrangement (both isotropic and anisotropic configurations) and interfacial thermal resistance on the in-plane thermal conductivity of the CNC-PVA composite films. To demonstrate an application for flexible electronics, thermal images of a concentrated heat source on both neat PVA and CNC-PVA composite films were taken that showed the temperature of the resulting hot spot was lower for the composite films at the same power dissipation. Date: Monday, April 15, 2019 Time: 1:00 P.M. Place: HAMP 2102

1 0

Seminar Reminder for Shikha Shrestha's Ph.D. Final Exam, Friday, April 12, at 2:00 p.m., in ARMS 1028. " Effect of Nanocellulose Reinforcement on the Properties of Polymer Composites
by Son, Rosemary E 11 Apr '19

11 Apr '19

Please consider attending the following: MATERIALS ENGINEERING SEMINAR "Effect of Nanocellulose Reinforcement on the Properties of Polymer Composites" By Shikha Shrestha Purdue MSE Ph.D. Final Exam Advisor: Professor Jeffrey P. Youngblood ABSTRACT Polymer nanocomposites are envisioned for use in many advanced applications, such as structural industries, aerospace, automotive and electronic materials, due to the improved properties like mechanical strengthening, thermal and chemical stability, easy bulk processing, and/or light-weight instigated by the filler-matrix combination compared to the neat matrix. In recent years, due to increasing environmental concerns, many industries are inclining towards developing sustainable and renewable polymer nanocomposites. Cellulose nanomaterials (CNs), including cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs), have gained popularity due to their excellent mechanical properties and eco-friendliness (extracted from trees, algae, plants etc.). However, to develop CN-reinforced nanocomposites it is necessary to understand impact of hygroscopic swelling, aspect ratio, and content of CNs on the overall performance of nanocomposites; and overcome the low dispersibility of CNs and improve their compatibility with hydrophobic matrix. In this work, we attempt to understand the influence of single nanocrystals in the hygroscopic response exhibited by nanostructured films; effect of CNCs on the properties of CNC-reinforced fibers; and hydrophobized CNFs using a facile, aqueous surface modification to improve interfacial compatibility with epoxy. To evaluate the effect of CNC alignment in the bulk response to hygroscopic expansion, self-organized and shear-oriented CNC films were prepared under two different mechanisms. The coefficient of hygroscopic swelling (CHS) of these films was determined by using a contact-free method of Contrast Enhanced Microscopy Digital Image Correlation (CEMDIC) that enabled the characterization of dimensional changes induced by hygroscopic swelling of the films. By calculating the CHS values of CNC, it was determined that hygroscopic swelling is highly dependent on the alignment of nanocrystals within the films, with aligned CNC films showing dramatically reduced hygroscopic expansion than randomly oriented films. Next, to study the effects of different aspect ratios of CNCs on intrinsic properties of polyvinyl alcohol (PVA) fibers, CNCs extracted from wood and cotton were reinforced into PVA to produce fibers by dry-jet-wet spinning. The elastic modulus and tensile strength of the fibers improved with increasing CNC content (5 - 15 wt. %) at the expense of their strain-to-failure. The mechanical properties of fibers with cotton CNC were higher than the fibers with wood CNC when the same amount of CNCs were added due to their higher aspect ratio. The degree of orientation along the spun fiber axis was quantified by 2D X-ray diffraction. Micromechanical models were used to predict the fiber performance and compare with experimental results. Finally, to improve the dispersibility and compatibility of CNFs with epoxy, CNFs were modified by a water-based method where tannic acid (TA) acts as a primer with CNF and reacts with hexadecylamine (HDA). The modified (-m) and unmodified (-um) CNFs were filled into hydrophobic epoxy resin. Better dispersion and stronger adhesion between fillers and epoxy were obtained for m-CNF than the um-CNF, resulting in better mechanical properties of nanocomposites at the same loading. Thermal stability and the degradation temperature of m-CNF/epoxy improved when compared to neat epoxy. Date: Friday, April 12, 2019 Time: 2:00 P.M. Place: ARMS 1028

1 0

Seminar Reminder for Anneliese Brenner's Ph.D. Final Exam Friday, April 12, at 8:30 a.m., in HAMP 2118. "Microstructural Investigations of Sm-Doped ZrB2 for Hypersonic Applications"
by Son, Rosemary E 11 Apr '19

11 Apr '19

Please consider attending the following: MATERIALS ENGINEERING SEMINAR "Microstructural Investigations of Sm-Doped ZrB2 for Hypersonic Applications" By Anneliese E. Brenner Purdue MSE Ph.D. Final Exam Advisor: Professor Rodney W. Trice ABSTRACT Sharp leading edges required for hypersonic vehicles improve the maneuverability as well as reduce aerodynamic drag. However, due to the sharp design, increased surface temperatures require materials that can withstand these extreme conditions. Ultra-high temperature ceramics are a material group being considered for the leading-edge material, specifically ZrB2/SiC (ZBS) which has a high thermal shock resistance, melting temperature, and thermal conductivity. Studies done by Tan et. al. has shown that adding samarium (Sm) as a dopant to ZBS has an emittance of 0.9 at 1600oC and develop oxide scales that have excellent ablation performance. However, it remained unknown how the Sm doped oxide scale formed as well as how the emittance and ablation performance are affected by the microstructure. This study investigates the oxide scale development of 3 mol% doped Sm-ZBS billets as well as how differences in microstructure affect the emittance and ablation performance. Samples were prepared via chemical infiltration of samarium nitrate into spray-dried powders of 80 vol.% ZrB2/20 vol.% SiC; powders were then pressed into billets and pressureless sintered. Samples cut and polished from these billets were then oxidized for 10, 60, or 300 s, respectively, using an oxyacetylene torch. X-ray diffraction was used to determine the sequence of oxidation of Sm-ZBS, beginning with the formation of ZrO2 and Sm2O3. The final oxide scale was determined to be c1-Sm0.2Zr0.8O1.9, with a melting temperature exceeding 2500oC. SEM and EDS were also used to investigate the microstructural formation that occurs from the bursting of convection cells. Samples with different microstructures revealed similar topographical microstructures post-ablation due to the sequence of the oxide formation. However, samples with rougher surfaces and higher porosities had a higher concentration of trapped glass in the cross-sectional oxide scale. It was also found that due to differences in heating the sample during emittance testing, the oxide developed was the same for all the samples. It was also found that differences in microstructure had no effect on the spectral emittance of Sm-ZBS at ultra-high temperatures. The fabrication of c1-Sm0.2Zr0.8O1.9 (SZO) as a bulk billet was also investigated to use as a thermal barrier coating (TBC) in replacement of Sm-ZBS. Date: Friday, April 12, 2019 Time: 8:30 A.M. Place: HAMP 2118

1 0

Seminar Notice for Kayla Yano's Ph.D. Final Exam. Seminar Thursday, April 18, at 9:00 a.m., in ARMS 3115. Exam same day in ARMS 2326, at 10:00 a.m. "In Situ TEM Mechanical Testing in Irradiated Oxide Dispersion Strengthened Alloys"
by Son, Rosemary E 11 Apr '19

11 Apr '19

Please consider attending the following: MATERIALS ENGINEERING SEMINAR "In Situ TEM Mechanical Testing in Irradiated Oxide Dispersion Strengthened Alloys" By Kayla H. Yano Purdue MSE Ph.D. Final Exam Advisors: Professor Janelle P. Wharry and Professor Maria Okuniewski ABSTRACT The objective of this dissertation is to demonstrate the use of in situ TEM mechanical testing to find mechanical properties of as received, self-ion, and proton irradiated Fe-9%Cr ODS. The use of charged particle irradiation in the evaluation of nuclear reactor candidate materials requires the development of novel methods to assess mechanical properties in near-surface irradiation damage layers. Yet at such small micron or nanometer scales the mechanical properties can begin to be impacted by size-effects. In this work micropillar compression, cantilever bending, lamellae indentation, and clamped beam fracture testing is conducted on ion-irradiated Fe-9%Cr ODS to find yield stress, elastic modulus, flow stress, and fracture toughness. We find a threshold in sample dimension at which size-effects are observed that is directly related to obstacle spacing. By combining an understanding of the microstructure of irradiated Fe-9%Cr ODS and the in situ TEM technique, one can find the bulk-like mechanical properties of ion irradiated Fe-9%Cr ODS. Date: Thursday, April 18, 2019 Time: 9:00 A.M. Place: ARMS 3115

1 0

MSE Merchandise Store
by Coar, Stacey L 10 Apr '19

10 Apr '19

Hello Everyone, The MSE online merchandise store is finally up and running! Below you will find the link to the store with all of the items available for sale. The store will close next Wednesday, April 17th at Midnight. For delivery there will be two options: 1) Have it shipped to you and pay shipping charges 2) Pickup at MSE main office front desk from Stacey -Select the Pickup at Freckles Option, we will be picking up all of the shirts together and bringing them to Armstrong Freckles is currently running about a week production time, so we expect to have the shirts available to pickup on April 25th. I will send out another email when they are ready for pickup. If you have any questions or issues feel free to email me at hrowlan(a)purdue.edu<mailto:hrowlan@purdue.edu>, or come by the table we will have set up around the MSE computer lab. As this table will be staffed by MSE students there may not be someone there at all times throughout the day. https://shop.frecklesgraphics.com/purdue_materials_science_and_en/shop/home [https://images.inksoft.com/images/publishers/563/stores/purdue_materials_sc…]<https://shop.frecklesgraphics.com/purdue_materials_science_and_en/shop/home> Purdue Materials Science and Engineering<https://shop.frecklesgraphics.com/purdue_materials_science_and_en/shop/home> shop.frecklesgraphics.com Thank You, Harley Rowland PUMA Treasurer hrowlan(a)purdue.edu<mailto:hrowlan@purdue.edu> 832-922-9108

1 0