May 2017 - Msepostdoc-list

Fwd: Next Generation Manufacturing Faculty Candidate Seminar
by Donna Bystrom 26 May '17

26 May '17

*Next Generation Manufacturing Faculty Candidate Seminar* ** *DATE: May 30, 2017* *TIME: 10:30 A.M.* *LOCATION: Graduate Student Center* *Lin Li*** Associate Professor Director, U.S. Department of Energy Industrial Assessment Center Director, Sustainable Manufacturing Systems Research Laboratory Department of Mechanical and Industrial Engineering University of Illinois at Chicago *Advanced Manufacturing Process and System for Energy Efficiency and Environmental Sustainability* ** Patti Finney Administrative Assistant Graduate Program Purdue University Environmental and Ecological Engineering pfinney(a)purdue.edu <mailto:pfinney@purdue.edu> Potter Engineering Center, Room 364D Phone: 765-496-0545 Fax: 765-494-4482

1 0

mail delivery & pickup - May 25
by Donna Bystrom 24 May '17

24 May '17

FYI-----Due to Spring Fling on Thursday, May 25th, mail service will only be available in the morning. This includes FedEx and UPS. If you have something you want sent out, I suggest you get it ready to go on Wednesday. Also, the staff will only be in the office in the morning on that day. Donna

1 1

Fwd: FW: Seminar Announcement / May 26th 10-11 am
by Donna Bystrom 22 May '17

22 May '17

*//*** ** *//* School of Mechanical Engineering Seminar A Roadmap for the Virtual Design of Metallic Materials: From Atoms to Components Prof. Javier LLorca Scientific Director, IMDEA Materials Institute Professor of Materials Science, Technical University of Madrid 10:00 AM – 11:00 AM, May 26, 2017 ME 2054 Abstract A simulation roadmap is presented to carry out virtual design, virtual processing and virtual testing of metallic alloys for engineering applications. The strategy is based on a bottom-up, multiscale modelling approach which runs along two parallel lines: simulation of the microstructural development during processing (virtual processing) and simulation of the mechanical behavior form the microstructure (virtual testing). Modeling efforts begin with ab initio simulations and bridging of the length and time scales is accomplished through different strategies which encompass the whole range of length and time scales required by virtual design, virtual processing and virtual testing. Nevertheless, not everything can or should be computed and critical experiments are an integral part of the strategy for the calibration and validation of the multiscale strategies at different length scales. Two examples of application of the different parts of the strategy for virtual processing and virtual testing are presented in detail. Biography Prof. Javier LLorca is scientific director and founder of the IMDEA Materials Institute and professor and head of the research group on “Advanced Structural Materials and Nanomaterials” at the Technical University of Madrid. He got his PhD in Materials Science from the Technical University of Madrid and has held visiting appointments at Brown University, Shanghai Jiao Tong University and Indian Institute of Science. Prof. LLorca, a Fulbright scholar, is Fellow of the European Mechanics Society and member of the Academia Europaea and has received the Research Award from the Spanish Royal Academy of Sciences. His research activities have been focused in the systematic application of computational tools and multiscale modeling strategies to establish the link between processing, microstructure and properties of structural materials. A key feature of his contributions is the use of novel experimental techniques to determine the properties of the phases and interfaces in the material at the nm and μm scale. So, simulations are fed with experimental values independently obtained and free of "adjusting" parameters. Some of these developments have become the foundation of the modern techniques of virtual testing of composites, which are starting to be used by the aerospace industry to minimize the number of costly mechanical tests to characterize and certify composite structures. His current research interests –supported by an Advanced Grant from the European Research Council–are focused in the development of multiscale modeling strategies to carry out virtual design, virtual processing and virtual testing of metallic materials, including the experimental validation at different length scales, so new alloys can be designed, tested and optimized in silico before they are actually manufactured in the laboratory. Contact: Thomas Siegmund, siegmund(a)purdue.edu <mailto:siegmund@purdue.edu>

1 0

Fwd: Discovery Park Distinguished Lecture Series Seminar – Michael Freedman on Friday, May 26th
by Donna Bystrom 22 May '17

22 May '17

Please share the following seminar announcement with your faculty and staff.

1 0

Fwd: FW: Physical Facilities Connection – May 18, 2017
by Donna Bystrom 19 May '17

19 May '17

FYI — Sidewalk, plaza closures by Materials and Electrical Engineering Building through August <https://www.purdue.edu/physicalfacilities/pfconnection/2017/02-second-quart…> *From:* Clendenning, Amanda M *Sent:* Thursday, May 18, 2017 3:05 PM *Subject:* Physical Facilities Connection – May 18, 2017 cid:image003.png@01CF655A.1BCC4E70 <https://www.purdue.edu/physicalfacilities/pfconnection/recent-news/index.ht…> Contact Us <mailto:rmkiefer@purdue.edu;rlterry@purdue.edu> News from Physical Facilities for Building Deputies – May 18, 2017 *Construction Notices* Sidewalk, plaza closures by Materials and Electrical Engineering Building through August <https://www.purdue.edu/physicalfacilities/pfconnection/2017/02-second-quart…> A section of Wooden Drive will close May 22 <https://www.purdue.edu/physicalfacilities/pfconnection/2017/02-second-quart…>

1 0

FW: Printer migration for ARMS 2200 and 2300
by Son, Rosemary E 18 May '17

18 May '17

Good Morning, Please see instructions below regarding the 2300 printer. Rosemary -----Original Message----- From: AAE Site [mailto:aaesite@ecn.purdue.edu] Sent: Thursday, May 18, 2017 8:58 AM To: Son, Rosemary E <son39(a)purdue.edu> Cc: Coar, Stacey L <scoar(a)purdue.edu> Subject: Re: Printer migration for ARMS 2200 and 2300 Hello Rosemary, Please see the message below. Best, Gail Williams System Engineer ECN User Services *** Replied by: gailw at: 05/18/17 08:57:11 *** Hello Rosemary, The printer, arms2312p1 (used to be mse2300p1) , has been migrated to our new server. Please forward the instructions below for anyone that needs to reconnect the printer. ---- Please delete the old connections before continuing. ---- ** For Windows: Go to Start menu > Devices and Printers > right click on old printer, select Remove Device. ** For Mac: Go to Printer and Scanner Utility > select the old printer, then click on '-' icon on the bottom left of the window. ----- Reconnecting the printer ---- 1) For Windows system Click the 'Start' button and in the search box, type the following, then press Enter. \\ecnprint03.itap.purdue.edu\arms2312p1 After the driver is installed, the window with the 'Printer', 'Document' and 'View' menus can be closed. If asked for username and password (like a laptop user), use the following format: ecn\username (where username is your career account) (use your career account password) 2) For Linux system - Ubuntu Visit the KB: Ubuntu - http://eng.purdue.edu/jump/b4150a Select 'Windows Printer via SAMBA' and set authenticate with 'ecn\username' Map to this instead: Host: ecnprint03.itap.purdue.edu Queue: arms2312p1 3) For Mac system Visit: http://eng.purdue.edu/jump/b4162d For step 6, please use the following URL: smb://ecnprint03.itap.purdue.edu/arms2312p1-ps If needed, on step 7, you will need to select the driver for the printers, RICOH Aficio MP C5502 (If the printer isn't listed, please visit Apple store to download the driver: https://support.apple.com/kb/DL1867?locale=en_US) For step 8, select Finisher SR3090, Tray 3 (LCT), and Internal Tray2 For step 9, you will use your Purdue career account to log into the printer. If further assistance is needed, please feel free to contact ECN via the trouble report system: http://eng.purdue.edu/jump/7ae28 Thanks, Gail Williams ECN

1 0

FW: Reminder: Printer 2300 maintenance this morning
by Son, Rosemary E 18 May '17

18 May '17

From: Msestaff-list [mailto:msestaff-list-bounces@ecn.purdue.edu] On Behalf Of Son, Rosemary E Sent: Thursday, May 18, 2017 7:36 AM To: 'msefaculty-list(a)ecn.purdue.edu' <msefaculty-list(a)ecn.purdue.edu>; 'msestaff-list(a)ecn.purdue.edu' <msestaff-list(a)ecn.purdue.edu> Subject: [msestaff-list] Reminder: Printer 2300 maintenance this morning Faculty and Staff, ECN will conduct maintenance on Printer 2300 this morning. It will begin at approx. 8:30 and take about an hour. After the maintenance, a set of instructions will be sent out to add printer 2300 with a new name. The ECN technician may come to your office and ask if you need assistance with this transition. If you are not in your office, and have questions, please ask me or send a trouble ticket to ECN. Thank you, Rosemary School of Materials Engineering Purdue University Neil Armstrong Hall of Engineering 701 West Stadium Ave. Room 2200 West Lafayette, IN 47907 765-494-4105

1 0

Fwd: FW: Discovery Park Distinguished Lecture Series Seminar – Michael Freedman on Friday, May 26th
by Donna Bystrom 17 May '17

17 May '17

*From:* Discovery Park Engagement *Sent:* Tuesday, May 16, 2017 2:49 PM *Subject:* Discovery Park Distinguished Lecture Series Seminar – Michael Freedman on Friday, May 26th

1 0

FW: Printer migration for ARMS 2200 and 2300
by Son, Rosemary E 16 May '17

16 May '17

Good Morning, The printer name has been changed for ARMS 2200--old name mse2200p1. You will all need to delete the 2200 printer and follow the directions below to install the printer 2200 again it will be arms2200p1. There are directions for each computer system. DO NOT delete 2300 at this time--only 2200. If further assistance is needed, please feel free to contact ECN via the trouble report system: http://eng.purdue.edu/jump/7ae28 . This same thing will need to be done for the 2300 printer on Thursday after the change/maintenance is complete--an email reminder will be sent out on Thursday. Sincerely, Rosemary -----Original Message----- From: AAE Site [mailto:aaesite@ecn.purdue.edu] Sent: Tuesday, May 16, 2017 9:12 AM To: Coar, Stacey L <scoar(a)purdue.edu> Cc: Son, Rosemary E <son39(a)purdue.edu> Subject: Re: Printer migration for ARMS 2200 and 2300 Hello Rosemary and Stacy, Please see the message below. Best, Gail Williams System Engineer ECN User Services *** Replied by: gailw at: 05/16/17 09:10:09 *** Hello Rosemary and Stacy, The printer, arms2200p1 (used to be mse2200p1), has been migrated to our new server. Please feel free to forward the instructions below for anyone that needs to reconnect the printer. ---- Please delete the old connections before continuing. ---- ** For Windows: Go to Start menu > Devices and Printers > right click on old printer, select Remove Device. ** For Mac: Go to Printer and Scanner Utility > select the old printer, then click on '-' icon on the bottom left of the window. ----- Reconnecting the printer ---- 1) For Windows system Click the 'Start' button and in the search box, type the following, then press Enter. \\ecnprint03.itap.purdue.edu\arms2200p1 After the driver is installed, the window with the 'Printer', 'Document' and 'View' menus can be closed. If asked for username and password (like a laptop user), use the following format: ecn\username (where username is your career account) (use your career account password) 2) For Linux system - Ubuntu Visit the KB: Ubuntu - http://eng.purdue.edu/jump/b4150a Select 'Windows Printer via SAMBA' and set authenticate with 'ecn\username' Map to this instead: Host: ecnprint03.itap.purdue.edu Queue: arms2200p1 3) For Mac system Visit: http://eng.purdue.edu/jump/b4162d For step 6, please use the following URL: smb://ecnprint03.itap.purdue.edu/arms2200p1-ps If needed, on step 7, you will need to select the driver for the printers, Ricoh Aficio MP C4502 (If the printer isn't listed, please visit Apple store to download the driver: https://support.apple.com/kb/DL1867?locale=en_US) For step 8, select Finisher SR3039 and Lower Paper Tray For step 9, you will use your Purdue career account to log into the printer. If further assistance is needed, please feel free to contact ECN via the trouble report system: http://eng.purdue.edu/jump/7ae28 Thanks, Gail Williams ECN

1 0

Fwd: Center for Materials Processing&Tribology seminar
by Donna Bystrom 15 May '17

15 May '17

1 0